Specifications

Lumark
The Lumark WPLLED wall luminaire provides traditional architectural
style with high performance energy efficient illumination. Rugged
die-cast aluminum construction, stainless steel hardware along with a
sealed and gasketed optical compartment make the Wal-Pak virtually
impenetrable to contaminants. IP66 Rated. UL/cUL wet location listed.
Replaces up to 450W metal halide equivalent. The WPLLED wall
luminaire is ideal for pathway illumination, building entrances, vehicle
ramps, schools, tunnels, stairways and loading docks.
DESCRIPTION
Catalog #
Type
Date
Project
Comments
Prepared by
SPECIFICATION FEATURES
Housing
Rugged die-cast aluminum housing
and hinged, removable die-cast
aluminum door. One-piece silicone
gasket seals the optical chamber.
UL 1598 wet location listed and
IP66 ingress protection rated. Three
1/2” threaded conduit entry points
allow for thru-branch wiring.
Optical
Highly reflective anodized
aluminum reflectors provide high
efficiency illumination. Optical
assemblies include impact resistant
borosilicate refractive glass,
and full cutoff IESNA compliant
configurations. Patented, solid
state LED luminaires are thermally
optimized with four lumen
packages. Available in cool 5000K
or neutral warm 4000K LED color
temperature (CCT).
Electrical
Ballasts, LED driver and related
electrical components are hard
mounted to the die-cast housing
for optimal heat sinking and
operating efficiency. Wiring is
extended through a silicone gasket
at the back of the housing. Three
1/2” threaded conduit entry points
allow for thru-branch wiring. LED
thermal management system
incorporates both conduction and
natural convection to transfer
heat rapidly away from LED
source. Integral LED electronic
driver incorporates internal fusing
designed to withstand a 6kV
surge test and is Class 2 rated
for 120-277V with an operating
temperature of -40º to 40ºC.
Wal-Pak LED systems maintain
greater than 89% of the initial
light output after 50,000 hours of
operation.
Finish
Finished in UV stabilized polyester
powder coat paint for superior
protection against fade and wear.
Standard color is bronze.
Optional
Optional wire guard and visor are
available.
Warranty
Five-year warranty.
TECHNICAL DATA
UL/cUL Wet Location Listed
IP66 Rated
40°C Maximum Ambient Temperature
DesignLights Consortium
®
Qualified*
SHIPPING DATA
Approximate Net Weight:
15.0-19.30 lbs. (6.80-8.63 kgs.)
18" [456mm]
9-3/4" [238mm] 13" [330mm]
82W 122W
9-7/8"
[250mm]
DIMENSIONS
TD514027EN
January 25, 2018 11:33 AM
WPLLED
82W, 122W
LED
WALL MOUNT LUMINAIRE
*www.designlights.org