Cut Sheet

Daylighting Controls - Daylighting Sensors
www.coopercontrol.com
203 Cooper Circle P: 800-553-3879
Peachtree City, GA 30269 F: 800-954-7016
Outdoor Contact
Input Photosensor
• Outdoor light level sensor in
weatherproof housing
• Provides contact closure input to
lighting control panel when light level
drops below threshold
• Extended temperature range for
outdoor operation
Specifications:
Operating Environment:
• -40°F to 158°F (-40°C to 70°C)
• Suitable for outdoor use
Input Voltage: 24 VDC
Output Signal: Maximum load 10A @ 24 VDC
Wiring:
Moisture proof, color coded lead wire.
Wire length: 6”
Housing: Weatherproof Lexan
®
Sensor Size: 3.5” H x 1.25” W x .25” D
Threaded Stem: Stem adds 2” to overall height.
Swivel base provides 1/2”, 14 thread end that fits
1/2” knock out.
Warranty: Five year
Overview
The Outdoor Contact Input Photosensor is a system accessory for Greengate
lighting control systems. It allows control of lighting levels based on how much
natural light is present and is intended for outdoor use.
Operations
This system accessory is used in conjunction with a lighting control panel to
switch circuits ON or OFF based on outdoor light levels. The Outdoor
Contact Input Photosensor connects to the control panel low voltage switch
inputs. The photosensor constantly monitors the level of sunlight and
provides a signal to the lighting control panel when the light level crosses the
switching threshold.
Installation
This system accessory will require mounting and wiring at the site.
Ordering
This is an accessory for Greengate lighting control systems. It is not an
integral part of the system. There is no factory assembly needed. When
ordering any lighting control system specify the Outdoor Contact Input
Photosensor and quantity.
Catalog #
Description
PPS-5
Outdoor Contact Input Photosensor
Catalog #
Project
Comments
Prepared by
Type
Date