Programming Manual

60
WaveLinx User Manual
www.eaton.com/wavelinx
Step 6: Next, view the zone and sensors screens to review the devices that are affected by this occupancy set or to make a changes to the
controlled zones or assigned sensors.
•
Remove or add controlled zones by dragging and dropping the zone icon between the controlled zones list and the area zones lists. Zones
in the controlled zones list will be operated by the occupancy set. The default zones should automatically appear in this section. Newly
created zones may need to be manually added to the controlled zones section. Note that the occupied and unoccupied actions will only
process for the assigned zones. Even if a scene command is issued, it will be issued only to the zones assigned to the occupancy set.
•
Remove or add battery operated ceiling sensors by dragging them into or out of the assigned sensors list. Integrated sensors may not be
moved in this screen as they are added or removed based on the fixture’s zone assignment within the zone screen.
View or change what
zones operate from
this occupancy set
Drag and drop zones
to remove them
or to add them
Drag and drop
ceiling sensors to
remove them or
to add them
View or change what occupancy
sensors operate as part of this
occupancy set
Quick Links for Common Questions
•
My wallstation or occupancy sensor does not appear to operate during the day but seems to work at night. Why is this occurring?
See the answer on page 140.