Programming Manual

103
WaveLinx User Manual
www.eaton.com/wavelinx
Select auto detect location
Select use auto location
Verify success
Manually review coordinates
Allow location access
Method 2: If the computer or device being used to connect to the Wireless Area Controller is not connected to a network or does not
support the GPS location feature, the coordinates may be manually entered. Determine the latitude and longitude for the facility using a
basic internet search. In the system webpage, use the drop down arrows and entry boxes to enter the correct settings for the latitude and
longitude and then click on the submit location button. A success message will be displayed to indicate that the coordinates have been
updated in the controller.
Verify success
Submit the location
Enter the correct latitude
and longitude coordinates