Programming Manual

104
WaveLinx User Manual
www.eaton.com/wavelinx
Step 3: In the system page, review the current time and date at the top of the screen. If the time and date are not correct, first, make sure
the computer’s time and date are correct and then select the option to manually set date and time. Next, use the time zone drop down to
select the proper time zone. Click on the set time button to send the command to the controller. A success message will be displayed.
Select the option to manually
set date and time
Verify success
Verify that the
computer clock time
and date are correct
Select auto detect location
Select the correct time zone
Select the set time button
Optional: If the Wireless Area Controller is connected to a building network that uses a network time protocol (NTP) server, select the option
to use NTP synchronization and fill in the NTP server details.