Programming Manual

114
WaveLinx User Manual
www.eaton.com/wavelinx
Performing a System Restore
Restore the system at any time from a previously created backup file. A backup may also be restored to a replacement Wireless Area
Controller if necessary. During restoration, devices will remain in their current state until the restoration is complete and they have rejoined
the wireless network.
To restore the system:
Before beginning the restore process, if replacing a Wireless Area Controller, ensure that only the replacement Wireless Area Controller is
powered.
Step 1: Establish a connection from the computer and the Wireless Area Controller as the administrator user.
Step 2: In the system page, scroll down the screen, and then select the option to browse to the location of a backup file. Navigate to and
then select the backup file to restore.
System page
Select option to browse to
locate a backup file
Locate the backup file
Step 3: Next, select the upload option. After several minutes, a successful upload message should be displayed at the top of the backup and
restore section.
After several minutes, verify
the success of the upload
Select the upload option