Programming Manual

124

WaveLinx User Manual

www.eaton.com/wavelinx

Rebooting the Wireless Area Controller

It is possible to reboot the Wireless Area Controller from the internal webpages or from the mobile application. During changes to network

settings, the system may prompt for a reboot.

To perform the reboot, select the reboot option from the internal webpage, near the top of the screen, or on the mobile application’s area list

screen. Once started, a reboot takes approximately 2 to 4 minutes to complete.

Select reboot

Viewing Mobile Application Version

Use the WaveLinx Mobile Application to view the current application version.

Step 1: On the user’s mobile device, open the WaveLinx Mobile Application. The mobile application does not need to be connected to the

Wireless Area Controller to view the version information.

Step 2: At the top-left corner of the screen, tap the menu icon and then select the information icon. The screen will display the application

version. If the mobile application is connected to a Wireless Area Controller, the Wireless Area Controller firmware version will also be

displayed.

View the version

information

Select the

information icon

Select the menu

icon