Programming Manual

129
WaveLinx User Manual
www.eaton.com/wavelinx
Step 7: Next, open the originally programmed device. For load devices, open the device’s control zone. For wallstations or ceiling
sensors, locate the device in the in area section. Note that the icon for the device may be gray or red indicating that the device has lost
communication.
If the device is a load device,
select the device's zone
If the device is a wallstation
or ceiling sensor, select the
device in the area section
Open the device that
has been replaced
Step 8: In the device screen, select the replace icon. When prompted, select the name of the replacement device from the list. Wait for the
application to display a success message. After a brief delay, the device will begin operation per the original device settings.
Select the replace option
Choose the correct newly
paired device from the list
Verify success message