Programming Manual

19
WaveLinx User Manual
www.eaton.com/wavelinx
3: Ensure that Wi-Fi has been turned ON in the smartphone or tablet, and then navigate to the list of available Wi-Fi networks. Locate
the Wi-Fi network with the name Eaton-XXXXXXXXXXXX (where X is a string of letters and numbers). If there are multiple Wireless
Area Controllers at the facility, more than one wireless network with this naming criteria may appear. Select the Wi-Fi network Eaton-
XXXXXXXXXXXXXX where the X characters match the MAC ID noted in the previous step. The last number will be one digit higher than the
original MAC ID noted. When prompted, enter the password wclAdmin (case sensitive) and join the network.
Turn on Wi-Fi
Locate correct network that
matches the Wireless Area
Controller's MAC ID
Type in the password
wclAdmin and select join
4: Open the WaveLinx Mobile Application. The application may initially open in demo mode. Select the menu icon at the top-left corner of the
screen, and then tap the demo mode button to switch to “real-time” (live) mode. After a few seconds, the Wireless Area Controller with the
ID from the previous steps should appear on the screen. Select the desired Wireless Area Controller to continue.
Tap the menu icon
Tap to switch to live mode
Select the Wireless Area Controller