Programming Manual

22
WaveLinx User Manual
www.eaton.com/wavelinx
Zones
In any area, controlled loads are organized into zones. A zone is a “group” of one or more lights, receptacles or other loads that are to be
controlled together in the exact same way. The WaveLinx Mobile Application creates three zones by default. Zone 1 and 2 are automatically
created for dimmable lighting devices. Zone 3 is automatically created for switched receptacle devices. Up to 16 total zones may be used in
each area to meet application needs.
Default zones 1, 2 & 3
User defined zone
The type of zone defined is indicated by the zone icon.
Zone type What items belong in this load type group?
Dimmable Zone
• Integrated sensor lighting loads
(standard ambient, industrial, and outdoor integrated sensors)
• Dimmable loads connected to a WaveLinx wireless Dimming
Switchpack (0-10V connection being used)
• Dimmable lighting loads connected to a tilemount
daylight sensor
• WaveLinx Wireless Outdoor Lighting Control Modules
Receptacle Zone • WaveLinx Receptacles
• Receptacles connected to a WaveLinx wireless Dimming
Switchpack (0-10V connections not being used)
Non-dimmable Zone
• Non-dim load (switched load) connected to a WaveLinx wireless
Dimming Switchpack (0-10V connections not being used)