Programming Manual

28
WaveLinx User Manual
www.eaton.com/wavelinx
3: (Optional) If the area needs additional zones beyond the provided defaults (dimmable lighting zones 1 and 2, and receptacle zone 3), tap
the plus sign icon in the zones section to add a new zone. Type a descriptive name for the zone, and then select the zone type (dimmable,
receptacle, or non-dimmable switched) other parameters may be left at defaults or modified for the application. Save the settings to advance
into the new zone’s screen.
Add zone
Select high end or
low end trim values
Type zone name
Select zone type
Save the changes
Once the zone is created, use the back button at the top-left of the screen to navigate back to the area screen. The new zone should appear
in the zone list. Add additional zones as needed. Modify any zone name and behaviors by selecting the zone and tapping the edit button.
Important Note: If adding zones, after completing the full process to assign devices to the area, ensure that the new zone(s) is assigned to be controlled by
the occupancy set. See “Adjusting Occupancy Set Response” on page 57 for further details on adding a zone to an occupancy set.
Back button
Edit button
New zone