Programming Manual

39
WaveLinx User Manual
www.eaton.com/wavelinx
Modifying Names of Areas, Zones and Devices
Generic names will be assigned to the default zones and to devices during the configuration process. It is possible, but not required,
to change the default names of areas, zones and devices at any time using the edit feature.
To modify the name of an area, zone or device:
Step 1: Open the WaveLinx Mobile Application and establish a connection with the Wireless Area Controller as the administrator user.
Step 2: In the areas list, select the area that will be modified. If modifying a zone name, select the zone. If modifying a device, locate the
device in either the area device section, or within a zone‘s device section. Tap to open the desired item.
Select the desired area
To modify a zone name,
select the zone
To modify a wallstation or
ceiling sensor, select the
device in the area screen
To modify a device that directly
controls a load, select the device
from the zone screen
Step 3: In the upper-right corner of the area, zone or device screen, select the pencil icon to open an edit screen. Tap the name field and
type the desired name (no more than 20 characters). Touch the save button to apply the change.
Select the pencil icon to
open the edit screen
Type in the desired
name for the item
Save the settings