Programming Manual

WaveLinx User Manual

www.eaton.com/wavelinx

Step 5: Once in the screen, modify the scene with the desired options:

•

Select whether the adjustment will be “live” to see changes in real-time or “static” if light levels should not change during the

modification.

•

Use the adjustment tools within each zone to modify the scene response, adjusting the percentage for dimmable zones or ON/OFF for

switching zones. If there are more than two zones in the area, swipe left and right to navigate to additional zones.

•

If a zone should not operate in the selected scene, uncheck the zone to ignore the zone from the scene. The unchecked zone will stay at

its previous light level when this scene is triggered.

•

Select the option to hide the scene from mobile application personal control users by selecting the hidden option.

Once the scene changes are complete, touch the save button to save the modified response.

Select between real-time live

update and offline static mode

Activate the hidden option to

prevent personal control users

from seeing or issuing this scene

from the mobile app

For receptacle or

non-dimmable lighting zones,

use the ON/OFF button to select

desired scene response

For dimmable zones, use the

slider bar, percentage box, or up

and down arrows to adjust to the

desired light level

Swipe right or left to view and change

response for additional zones

Use the save button to save the

changes to the scene

Deselect the checkmark to have the

zone ignore this scene and remain at its

previous light level

Step 6: Select the back button at the top of the screen to navigate back to the area scene list. Repeat this procedure to modify additional

scenes repeating as necessary for other areas.

Back button