Programming Manual

51
WaveLinx User Manual
www.eaton.com/wavelinx
Step 4: In the wallstation screen, ensure that the faceplate configuration shown matches the faceplate of the wallstation model being
configured. For standard line voltage powered wallstations only, if necessary, select the correct configuration from the drop down list.
(Battery powered wallstations will not have the option to change the faceplate configuration.) Optionally, use the pencil icon edit feature to
rename the wallstation. Then, touch the desired button on the displayed wallstation graphic to modify the programming.
Tap the desired button to
modify the programming
If faceplate configuration does
not match, select the correct
faceplate from the list
(standard line voltage powered
wallstation only)
Tap the pencil icon to rename
the wallstation (optional)
Step 5: Select the desired action for the button and then choose the area that the action affects. Other parameter selections will be based
on the chosen action. Select the appropriate behavior, and then touch the save button.
Select the desired action
from the drop down list
Select the area to control
Select desired behavior for
the action
Save the change