Programming Manual

6
WaveLinx User Manual
www.eaton.com/wavelinx
WaveLinx Dimming Switchpack with 0-10V
Use the WaveLinx Dimming Switchpack with 0-10V to wirelessly
control a zone of switched loads or 0-10V lighting loads. Each
switchpack operates as a WaveLinx wireless router and endpoint.
The switchpack is rated for control of LED or other electronic ballast
loads of up to 16 amps and general purpose or receptacle loads of
up to 20 amps. The WSP-MV-010 0-10V output sinks up to 120mA
for support of approximately 60 ballasts/drivers (2mA each).
The WSP-CA-010 0-10V output sinks up to 30mA for support of
approximately 30 ballasts/drivers. The WaveLinx relay switchpack
includes power measurement capability for display within the
WaveLinx Mobile Application.
WSP-MV-010
WSP-CA-010
WaveLinx Integrated Sensor
Eaton offers many options for luminaires pre-configured with
a WaveLinx Integrated Sensor. The in-fixture sensor operates
as a WaveLinx wireless communications router as well as an
occupancy/vacancy sensor, closed loop daylight sensor, and power
measurement point. The standard ambient integrated sensor is also
available in a model equipped with Bluetooth
®
technology to allow
for future options.
WaveLinx Industrial Integrated Sensor
The WaveLinx Industrial Integrated Sensor installs as an option into
many Eaton industrial light fixtures. The fixture mounted sensor
operates as a WaveLinx wireless communications router as well
as an occupancy/vacancy sensor, closed loop daylight sensor, and
power measurement point. Different models allow for low bay
mounting heights of 7-15 feet (2.1 – 4.5m) or high bay mounting
heights of 15-40 feet (4.5 – 12.2m).