Programming Manual

87
WaveLinx User Manual
www.eaton.com/wavelinx
Step 2: In the areas list, select the area to configure.
•
Step 3: If multiple wireless outdoor lighting control modules are within the area, decide which module will be used for daylighting. In the
mobile application area screen, tap on the zone that contains the chosen wireless outdoor lighting control module. If unsure of which device
it is, double tap the first device’s icon to place it in blink to identify mode. The icon will appear to pulse.
Tap on the fixture(s)
zone icon(s)
Identify the correct device(s) using
the blink to identify method
If the desired load in the location does not cycle ON and OFF or cycle between bright and dim, repeat this process with other device icons
until the correct load responds. Blink to identify mode can be cancelled prior to the 15 second automatic timeout period by double tapping
on the flashing device icon. Make note of the identified device’s name/descriptor, then click on the zone back button to exit the zone screen.