Installation & Assembly

ManualsBrandsCooper Lighting ManualsLightingPrevail 87-Watt LED Outdoor Security Area Light

INS #

Brand Logo

reversed out of

black

INS #

IB5120 02EN

Installation Instructions - Integrated sensor (supplementary)

Instructions d’installation - Détecteur intégré (complémentaire)

Instrucciones de instalación - Sensor integrado (complementario)

WARNING

Make certain power is OFF before starting installation

or attempting any maintenance.

WARNING

Risk of fire/electric shock. If not qualified, consult an

electrician.

WARNING

Risk of Electric Shock – Disconnect power at fuse or

circuit breaker before installing or servicing.

WARNING

Risk of Burn – Disconnect power and allow fixture to

cool before servicing.

WARNING

Risk of Personal Injury – Fixture may become damaged

and/or unstable if not installed properly.



Do not mount luminaire within 6” of a combustible

surface.



Do not touch LEDs.

NOTE: These instructions do not claim to cover all details

or variations in the equipment, procedure, or process

described, nor to provide directions for meeting every

possible contingency during installation, operation or

maintenance. When additional information is desired

to satisfy a problem not covered sufficiently for user’s

purpose, please contact your nearest representative.

NOTE: Specifications and dimensions subject to change

without notice.

IMPORTANT: Read carefully before installing fixture. Retain for future reference.

GENERAL: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the

attention of the delivery carrier. Compare the catalog description listed on the packing slip with the fixture label on the

housing to assure you have received the correct material.

SAFETY: This fixture must be wired in accordance with the National Electrical Code and applicable local codes and

ordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure under

installation section.

1-3/4”

[44mm]

7/8”

[22mm]

1”

[25mm]

Integrated sensor dimensions

INSTALLATION

Operation

This product comes with a factory installed and

pre-configured occupancy/photocontrol and does not

require additional field wiring. The occupancy sensor uses

passive infrared (PIR) technology with auto-on/auto-off

(MSP), or bi-level dimming (MSP/DIM) operation. The

bi-level dimming operation automatically dims the fixture

to approximately 50% light output after 10 minutes of no

occupancy. The sensor also includes a photo sensor that

will only operate the product from dusk-to-dawn.

Summary of content (8 pages)

PAGE 1
Brand Logo reversed out of black IB512002EN INS # Installation Instructions - Integrated sensor (supplementary) Instructions d’installation - Détecteur intégré (complémentaire) Instrucciones de instalación - Sensor integrado (complementario) WARNING WARNING Make certain power is OFF before starting installation or attempting any maintenance. Risk of Personal Injury – Fixture may become damaged and/or unstable if not installed properly. WARNING Risk of fire/electric shock.
PAGE 2
Installation Instructions – Integrated sensor (supplementary) The white lens in the center of the sensor directs the view of a passive infrared occupancy detector to sense occupants moving through the space. To trigger the light on, an occupant must cross at least two passive infrared beams. When motion in the coverage area ceases, the sensor logic determines the space is unoccupied and begins a count-down timer (10 minutes default).
PAGE 3
Instructions d’installation - Détecteur intégré (complémentaire) AVERTISSEMENT Assurez-vous que l’alimentation électrique soit HORS TENSION avant de commencer l’installation ou de procéder à l’entretien. AVERTISSEMENT Risque d’incendie et de décharge électrique. Si vous n’êtes pas qualifié, consultez un électricien. AVERTISSEMENT Risque de décharge électrique – Mettez l’alimentation électrique hors tension en enlevant le fusible ou en déclenchant le disjoncteur avant l’installation ou l’entretien.
PAGE 4
Instructions d’installation - Détecteur intégré (complémentaire) La lentille blanche au centre du détecteur dirige la vue d'un détecteur d'occupation à infrarouges passifs pour détecter le mouvement de personnes dans la pièce. Pour déclencher l'allumage de la lumière, un occupant doit traverser au moins deux faisceaux infrarouges passifs. Dès l'arrêt de tout mouvement dans la zone de couverture, la logique du détecteur détermine que la pièce est vide et déclenche une minuterie (de 10 minutes par défaut).
PAGE 5
Instrucciones de instalación - Sensor integrado (complementario) ADVERTENCIA Asegúrese de que la alimentación esté DESCONECTADA antes de comenzar la instalación o intentar realizar el mantenimiento. ADVERTENCIA Riesgo de incendio y descarga eléctrica. Si no está cualificado, consulte con un electricista. ADVERTENCIA Riesgo de descarga eléctrica: Desconecte la alimentación en el disyuntor o fusible antes de instalar o realizar tareas de mantenimiento.
PAGE 6
Instrucciones de instalación - Sensor integrado (complementario) 0 (0) Para alturas de montaje de 0' a 30' (0 m a 9,14 m) 30 (9,14) La lente blanca en el centro del sensor dirige la visión de un detector de movimiento infrarrojo pasivo para detectar ocupantes que se mueven en el espacio. Para activar el encendido de la luz, un ocupante debe cruzar, al menos, dos rayos infrarrojos pasivos.
PAGE 7
PAGE 8
Warranties and Limitation of Liability Please refer to www.eaton.com/LightingWarrantyTerms for our terms and conditions. Garanties et limitation de responsabilité Veuillez consulter le site www.eaton.com/LightingWarrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.eaton.com/LightingWarrantyTerms para conocer nuestros términos y condiciones. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.