Specifications

ManualsBrandsCooper Lighting ManualsCeiling Lights6" Shower Recessed Trim

HALO

TD518242EN

September 20, 2018 2:26 PM

SPECIFICATION FEATURES

DESCRIPTION

The Halo Surface Mount LED Downlight (SMD) is a low profile surface

mounting luminaire with a modern look and high performance. SMD6 (6”)

is designed for installation in many 3-1/2” and 4” square, octagon, or round

junction boxes. Supply wire adapter with LED quick wiring connector included.

The SMD6 may also retrofit in 5” and 6” aperture IC and Non-IC recessed

housings.

HOUSING

• Non-electrically conductive

polycarbonate frame.

• High impact diffuse polystyrene

lens provides shielding to the

light guide with no pixilation

• Stamped aluminum housing

provides thermal cooling

achieving L70 at 50,000 hours in

IC and non-IC applications

GASKETS

• Closed cell gasket achieves

restrictive airflow and wet

location requirements without

additional caulking

OPTICS

• Precision acrylic light guide

organizes source flux into wide

distribution with 1.2 – 1.4 spacing

criteria useful for general area

illumination

LED

• Mid power LED array provide

a uniform source with high

efficiency and long life.

• Available in 90 CRI minimum,

R9 greater than 50 and color

accuracy within 3 SDCM provide

color accuracy and uniformity

DRIVER

SMD 120V

• Integral 120V 50/60Hz constant

current driver provides noise free

operation.

• Continuous, flicker-free dimming

from 100% to 5% with select

leading or trailing edge 120V

phase cut dimmers.

• Dimming to 5% is best assured

using dimmers with low end

trim adjustment. Consult dimmer

manufacturer for compatibility

and conditions of use. (Note

some dimmers require a neutral

in the wallbox.)

• Inline electrical quick connect and

E26 adapter (provided) provides

mains connections.

SMD 120-277V

• Integrated 120-277V 60Hz

constant current driver provides

noise free operation.

• SMD Universal Voltage (120-277V)

configurations are recommended

for use with compatible 0-10V DC

low voltage dimmers only.

MOUNTING/RETENTION

• Adjustable spider plate allows

for quick installation into both

junction boxes and recessed

housings.

• Torsion springs and friction

blades included

ELECTRICAL JUNCTION BOX

MOUNTING

• The SMD may be used in

compatible electrical junction

boxes in direct contact with

insulation including spray foam

insulation.

• Suitable for installation in many

3-1/2” and 4” square, octagon,

and round electrical junction

boxes.

Note: SMD120-277V UNV is only

compatible with junction boxes

that provide minimum depth of

2-1/8”.

• Installer must ensure

compatibility of fit, wiring and

proper mounting in the electrical

junction box. This includes all

applicable national and local

electrical and building coded

RECESSED HOUSING MOUNTING

• May be installed in IC recessed

housings in direct contact with

insulation

Note: Not for use in recessed

housing in direct contact with

spray foam insulation. Refer to

NEMA LSD 57-2013.

Torsion Spring 5” & 6”

• Precision formed torsion spring

bracket kit included

• The torsion springs adjust on

the mounting plate to fit 5” or 6”

compatible housings

Friction Blade 5” & 6”

• Precision formed friction blades

included

• For retrofit in 5” and 6” housings

without torsion springs mounting

tabs.

• Friction blade design allows

the SMD to be installed in any

position within the housing

aperture (360 degrees)

DESIGNER SKINS

(SOLD SEPARATELY)

• SMD skins are accessory rings

in both round and square. These

skins attach to the SMD for a

permanent finish. Refer to the

SMD accessories specification

sheet for details.

- Matte White (Paintable)

- Satin Nickel

- Tuscan Bronze

WARRANTY

• Five year limited warranty,

consult website for details.

www.eaton.com/lighting/legal

COMPLIANCE

• cULus Certified for use with Halo

housings and for use with other’s

housings, see instruction sheet

for conditions of acceptability.

• Wet and Damp Location listed,

airtight per ASTM-E283

• Suitable for use in closets,

compliant with NFPA® 70,

NEC® Section 410.16 (A)(3)

and 410.16 (C)(5)

• EMI/RFI emissions per FCC 47CFR

Part 15B

• Contains no mercury or lead and

RoHS compliant.

• Photometric testing in accordance

with IES LM-79-08

• Lumen maintenance projections

in accordance with IES LM-80-08

and TM-21-11.

• Can be used for State of

California Title 24 high efficacy

luminaire compliance, reference

the California Energy Commission

Title 20 Appliance Efficiency

Database for current listings.

• Can be used for International

Energy Conservation Code (IECC)

and high efficiency luminaire

compliance

•

ENERGY STAR

listed, reference

database for current listings

SMD6 Series

6 inch Round and Square

SMD6R

SMD6S

6” Surface Mount

Downlight

Suitable for ceiling or wall

electrical junction boxes

Suitable for 5” and 6”

recessed housing retrofit

Non-conductive

Dead Front

Refer to ENERGY STAR® Certiﬁed Products List.

Can be used to comply with California Title 24 High Efﬁcacy requirements.

Certiﬁed to California Appliance Efﬁciency Database under JA8.

Note: For Direct mount product please refer to the SLD6-DM spec sheet.

Catalog #

Type

Project

Comments

Date

Prepared by

Summary of content (6 pages)

PAGE 1
HALO DESCRIPTION The Halo Surface Mount LED Downlight (SMD) is a low profile surface mounting luminaire with a modern look and high performance. SMD6 (6”) is designed for installation in many 3-1/2” and 4” square, octagon, or round junction boxes. Supply wire adapter with LED quick wiring connector included. The SMD6 may also retrofit in 5” and 6” aperture IC and Non-IC recessed housings.
PAGE 2
HALO SMD6 Series ENERGY DATA SMD6R6 SMD6S6 SMD6R12 SMD6S12 Round Square 788 815 Lumens (5000K models) SMD6R12-E SMD6S12-E Lumens (5000K models) Round Square 1252 1235 Lumens (5000K models) Round Square 1200 1180 Input Power 9.6 W 9.9 W Input Power 15.3 15.7 Input Power 15.3 16 Input Current 0.0811 A 0.085 A Input Current 0.133 A 0.132 A Input Current Efficiency 82 lm/W 82 lm/W Efficiency 82 lm/W 79 lm/W 0.133 A - (120V) 0.061 A - (277V) 0.132 A - (120V) 0.
PAGE 3
HALO SMD6 Series HOUSING COMPATIBILITY The SMD6 is UL Certified in Halo recessed housings and for use with any 5 or 6 inch diameter recessed housing constructed of steel or aluminum with an internal volume that exceeds 107.9 in3 in addition to those noted below. Note: Some other’s housings require installation with included friction clips.
PAGE 4
HALO SMD6 Series PHOTOMETRIC DATA - SMD6 (120V) SMD6R6927WH SMD6S6927WH Luminaire lumens 750 Luminaire lumens 750 Input watts 9.4 Input watts 10.0 80 LER (LPW) LER (LPW) Spacing Criteria 0-180 1.26 90-270 1.26 Diagonal 1.38 Spacing Criteria 75 0-180 1.24 90-270 1.24 Diagonal 1.36 Beam angle (degrees) 112 Beam angle (degrees) 112 Field angle (degrees) 162 Field angle (degrees) 162 264 Max. Candela Zonal lumen Lumens 271 Max.
PAGE 5
HALO SMD6 Series PHOTOMETRIC DATA - SMD6-1200 (120V) SMD6S12927WH SMD6R12927WH Luminaire lumens 1187 Luminaire lumens 1235 Input watts 15.9 Input watts 15.9 75 LER (LPW) LER (LPW) Spacing Criteria 0-180 1.26 90-270 1.26 Diagonal 1.38 Spacing Criteria 78 0-180 1.26 90-270 1.26 Diagonal 1.38 Beam angle (degrees) 113 Beam angle (degrees) 113 Field angle (degrees) 165 Field angle (degrees) 164 408 Max. Candela Zonal lumen Lumens 426 Max.
PAGE 6
HALO SMD6 Series PHOTOMETRIC DATA - SMD6-1200-E (120V-277V) SMD6R12927WHE SMD6S12927WHE Luminaire lumens 1210 Luminaire lumens 1167 Input watts 15.4 Input watts 15.6 LER (LPW) 78.6 LER (LPW) 74.8 Spacing Criteria 0-180 1.26 90-270 1.26 Diagonal Spacing Criteria 1.38 0-180 1.26 90-270 1.26 Diagonal 1.38 Beam angle (degrees) 112.8 Beam angle (degrees) 113.5 Field angle (degrees) 164 Field angle (degrees) 165 418.7 Max. Candela Zonal lumen 402.1 Max.