Owner's manual

ManualsBrandsCooper Lighting ManualsLightingMEL25M

12 STREETWORKS Outdoor Lighting Solutions Cooper Lighting

NOTE: 1 Arms not included. Order Separately. See accessories. 2 All HID lamps are mogul-base. 3 320 and 350W Pulse Start Metal Halide only. 4 400W MH requires reduced envelope ED28 Lamp. 5 Electrodeless Fluorescent QL

lamp only. Available in vertically lamped optical systems and Type 3S and 5S distribution only. 120V only. 6 Refer to technical section for lamp/ballast/voltage compatibility. 7 Vertical lamp option only. Maximum wattage of

250W HID. 8 SLE only available with Solid Mid selection or with NG option. 9 Custom and RAL color matching available upon request. Consult your Cooper Lighting Representative for more information. 10 Quartz options

not available with SL optic or vertical lamped optical systems. 11 Dual switching requires dual 57W or dual 70W Compact Fluorescent lamps, and allows independent switching control of each lamp through use of two (2)

electronic ballasts. Allows 50% power reduction when dual ballasts are independently wired and controlled. 12 House side shield available on horizontally lamped 2S, 3S, and 4S optical systems only. 13 NG option retains

daytime appeal of window, louvered, slot, solid rings, or luminous rings mid section styles, but does not allow light into the upper chamber of the housing. Mid section will not glow at night, maintaining the cutoff

control associated with the standard solid mid section. 14 Requires use of 4" O.D. round straight pole. 15 Finials compatible with Traditional Arms only. 16 Not compatible with finials.

TOP

Cast aluminum housing maintains

sidewall thickness and attaches to

mounting arm hub with four (4)

stainless steel fasteners.

MIDSECTION

Milky white acrylic lens utilizes

continuous silicone gaskets to seal

lens to top casting and shade.

Optional colored luminous rings

are available.

SHADES

Heavy gauge precision spun

aluminum shades offer superior

surface finish and consistency in

form.

DOORFRAME ASSEMBLY

Die-cast aluminum 1/8" thick door

and doorframe seal to underside of

shade with a thick wall continuous

silicone gasket.

OPTICAL SYSTEMS

Choice of five (5) high efficiency

segmented optical systems

constructed of premium 95%

reflective anodized aluminum sheet.

ELECTRICAL TRAY

Ballast and related electrical

componentry are mounted to a

reinforced one piece tray with

integral handle. Quick disconnect

wiring plugs allow easy tray

removal during routine

maintenance.

FINISH

Housing finished in a 5 stage

premium TGIC polyester powder

coat paint, 2.5 mil nominal

thickness for superior protection

against fade and wear. Standard

colors include black, bronze, grey,

white, dark platinum, graphite

metallic, and hartford green.

RAL and custom color matches

available. Consult your Streetworks

Representative.

ORDERING INFORMATION

SAMPLE NUMBER: MEL25MWW2SXSWBK

BALLAST TYPE

C=CWI

H=Reac./HPF

K=10KV CWA

N=Hi. Reac./NPF

P=Hi. Reac./HPF

R=Reac./NPF

W=CWA

I=Induction

DECORATIVE AREA COLLECTION

OPTIONS (add as suffix)

1=Single Fuse

2=Double Fuse

C=Emergency Quartz—Separate Circuit

D=Dual Fluorescent Switching Control

E=Emergency Quartz with Time Delay

F=Frosted Flat Glass

H=House Side Shield

L=Lamp Included

Q=Quartz Standby

R=Frosted Sag Glass

S=Sag Glass

PMT=Post Mount Tenon

PM-PCR=NEMA Type Photocontrol Receptacle

(Post Mount Only)

NG=No Glow Luminous Mid Section

ACCESSORIES (order separately/replace XX with color suffix)

MEL Modern Epic Large Arms

[see page 14-15 for details on arm accessories]

SA6005-XX=MEL Bishop Single Pole Mount Arm

SA6006-XX=MEL Bishop Single Pole Mount Arm with

Cross Rod

SA6007-XX=MEL Bishop Twin Pole Mount Arm

SA6008-XX=MEL Bishop Twin Pole Mount Arm with

Cross Rods

SA6009-XX=MEL Traditional Single Pole Mount Arm

SA6010-XX=MEL Traditional Single Pole Mount Arm

with Rounded Upper Bar

SA6011-XX=MEL Traditional Single Pole Mount Arm

with Rounded Lower Bar

SA6012-XX=MEL Traditional Single Pole Mount Arm

with 45° Upper Bar

SA6013-XX=MEL Traditional Single Pole Mount Arm

with 45° Lower Bar

SA6014-XX=MEL Traditional Single Pole Mount Arm

with 45° Upper Strap

SA6016-XX=MEL Traditional Twin Pole Mount Arm

SA6017-XX=MEL Traditional Twin Pole Mount Arm

with Rounded Upper Bars

SA6018-XX=MEL Traditional Twin Pole Mount Arm

with Rounded Lower Bars

SA6019-XX=MEL Traditional Twin Pole Mount Arm

with 45° Upper Bars

SA6020-XX=MEL Traditional Twin Pole Mount Arm

with 45° Lower Bars

SA6021-XX=MEL Traditional Twin Pole Mount Arm

with 45° Upper Straps

SA6022-XX=MEL Tenon Adapter for 2 3/8" O.D. Horizontal

Tenon

CEL Modern Epic Large Arms

[see page 14-15 for details on arm accessories]

SA6054-XX=CEL Bishop Single Pole Mount Arm

SA6055-XX=CEL Bishop Single Pole Mount Arm

with Cross Rod

SA6056-XX=CEL Bishop Twin Pole Mount Arm

SA6057-XX=CEL Bishop Twin Pole Mount Arm

with Cross Rods

SA6058-XX=CEL Traditional Single Pole Mount Arm

SA6059-XX=CEL Traditional Single Pole Mount Arm

with Rounded Upper Bar

SA6060-XX=CEL Traditional Single Pole Mount Arm

with Rounded Lower Bar

SA6061-XX=CEL Traditional Single Pole Mount Arm

with 45° Upper Bar

SA6062-XX=CEL Traditional Single Pole Mount Arm

with 45° Lower Bar

SA6063-XX=CEL Traditional Single Pole Mount Arm

with 45° Upper Strap

SA6065-XX=CEL Traditional Twin Pole Mount Arm

SA6066-XX=CEL Traditional Twin Pole Mount Arm

with Rounded Upper Bars

SA6067-XX=CEL Traditional Twin Pole Mount Arm

with Rounded Lower Bars

SA6068-XX=CEL Traditional Twin Pole Mount Arm

with 45° Upper Bars

SA6069-XX=CEL Traditional Twin Pole Mount Arm

with 45° Lower Bars

SA6070-XX=CEL Traditional Twin Pole Mount Arm

with 45° Upper Straps

SA6071-XX=CEL Tenon Adapter for 2 3/8" O.D. Horizontal

Tenon

OA/RA1016=NEMA Photocontrol—Multi-Tap

OA/RA1027=NEMA Photocontrol—480V

OA/RA1201=NEMA Photocontrol—Multi-Tap (347V)

ACCESSORY OPTIONS (add as suffix to accessory)

M=Modern Finial

A=Architectural Finial

N=Nostalgic Finial

4=NEMA Twistlock Photocontrol Receptacle

PRODUCT

FAMILY

MEL=Modern

Epic Large

CEL=Classic

Epic Large

LAMP TYPE

M=Metal

Halide

S=High

Pressure

Sodium

Q=Induction

LAMP

WATTAGE

HID

15=150W

17=175W

25=250W

32=320W

35=350W

40=400W

Electrodeless

Fluorescent

55=55W

85=85W

VOLTAGE

2=120V

0=208V

4=240V

7=277V

8=480V

9=347V

K=120/277V

wired 120V

L=277/120V

wired 277V

N=Multi-Tap

Wired 277V

W=Multi-Tap

Wired 120V

DISTRIBUTION

MA=Milk White

Acrylic

Jar

2S=Type II

3S=Type III

4S=Type IV

5S=Type V

SL=Spill Light

Eliminator

SHADE TYPE

SW=Straight

Wide

BL=Bell

FL=Flute

MID SECTION

TYPE

X=Solid

(Standard)

1=Window

2=Louvered

3=Slot

4=Solid Rings

5=Luminous

Rings

Optional Mid

Section Type

6=Luminous Rings—Red

7=Luminous Rings—Bright Blue

8=Luminous Rings—Deep Green

9=Luminous Rings—Warm Orange

COLOR

(add as suffix/

must specify)

AP=Grey

BK=Black

BZ=Bronze

DP=Dark

Platinum

GM=Graphite

Metallic

GN=Hartford

Green

WH=White

OPTIONS +

ACCESSORIES

(See Below)

MEL/CEL EPIC LARGE

55-400W

MH/HPS/QL

DECORATIVE

EPA:

Effective Projective Area:

Flat Lens 1.55

Sag Lens 1.75

SHIPPING DATA

Approximate Net Weight:

50 lbs. (23 kgs.)

OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]

STREETWORKS

™

IP65 RATED

NOTE: In all flat glass and solid mid sections

configurations only.

Maximum Width 31 13/16" [808mm]

NOTE: See MEL/CEL configurations on opposite page

for more detailed information.

Maximum

Height

26 1/2"

[673mm]

Summary of content (4 pages)

PAGE 1
D E C O R AT I V E MEL/CEL EPIC LARGE 55-400W MH/HPS/QL D E C O R AT I V E A R E A C O L L E C T I O N Maximum Height 26 1/2" [673mm] Maximum Width 31 13/16" [808mm] NOTE: See MEL/CEL configurations on opposite page for more detailed information. NOTE: In all flat glass and solid mid sections configurations only.
PAGE 2
M E L / C E L E P I C M E D I U M D E C O R AT I V E P H O T O M E T R I C S [ C o m p l e t e I E S f i l e s a v a i l a b l e a t w w w. c o o p e r l i g h t i n g . c o m ] 4 5 3 4 2 3 2 1 A B 5 4 3 2 1 0 1 2 C DE 3 A B C D E 0 4 1 1 0 2 1 3 2 4 3 5 F O O T C A N D L E TA B L E Select mounting height and read across for footcandle values of each isofootcandle line. Distance in units of mounting height.
PAGE 3
D E C O R AT I V E EPIC COLLECTION ARMS D E C O R AT I V E A R E A C O L L E C T I O N A R M S S P E C I F I C AT I O N S 33 1/2" [852mm] 62" [1575mm] 33 1/2" [852mm] Radius 12'' [304mm] 2'' [51mm] Radius 12'' [304mm] 2'' [51mm] 54 3/16'' [1376mm] 54 3/16'' [1376mm] BISHOP SINGLE POLE MOUNT ARM WITH CROSS ROD [SA6106, SA6155, SA6006, SA6055] Slipfits over 4" round straight pole, or 4" O.D. by 6" tall tenon. Weight: 25 lbs. E.P.A: .
PAGE 4
E P I C C O L L E C T I O N A R M S D E C O R AT I V E A R M S S P E C I F I C AT I O N S ( C O N ’ T. ) 35 7/16" [900mm] 35 7/16" [900mm] 18 7/8" [480mm] 26 3/4" [679mm] 26 3/4" [679mm] TRADITIONAL SINGLE POLE MOUNT ARM WITH 45° UPPER STRAP [SA6114, SA6163, SA6014, SA6063] Slipfits over 4" round straight pole, or 4" O.D. by 6" tall tenon. Weight: 24 lbs. E.P.A: 1.