Specifications

Owners Manual, Monaco 6000A, 6000N, 6002A, 6002N
5. Filters & Thermal Glass - Installation
WARNING!
70 WATTS OR BELOW WITH TRL OPTION ARE RECOMMENDED FOR PEDESTRIAN AREAS
INSTALLATION INSTRUCTIONS:
Up to three accessories may be installed.
The Internal Hex Cell Louver (LVR6), Temperature Reduction Lens (TRL), and Dichroic Filters are installed on top of Cast Bezel on inner
module assembly. It is recommended that they are installed in the following order:
Internal Hex Cell Louver (LVR6) -> Above both the LSL, Dichroic, & TRL
Linear Spread Lens (LSL) -> Above the Dichroic or TRL
Dichroic Filters -> Above the TRL
Temp Reduction Lens (TRL) -> At the lowest position
The Mount Spring is installed in the groove as shown above the accessories. It is not required when LVR6 is installed
Mount Spring Installed Accessories
Cast Bezel
Page 9 of 12 9700 B Owners Manual Monaco 6000.doc