Specifications
TD518243EN
September 20, 2018 2:31 PM
SPECIFICATION FEATURES
DESCRIPTION
The Halo Surface Mount LED Downlight (SMD) is an low profile surface
mounting luminaire with a modern look and high performance. SMD4 (4”)
is designed for installation in many 3-1/2” and 4” square, octagon, or round
junction boxes. Supply wire adapter with LED quick wiring connector included.
The SMD4 may also retrofit in 4” aperture IC and Non-IC recessed housings.
Compliant with NFPA
®
70, NEC
®
Section 410.16 (A)(3) and 410.16 (C)(5).
HOUSING
• Non-electrically conductive
polycarbonate frame.
• High impact diffuse polystyrene
lens provides shielding to the
light guide with no pixilation
• Stamped aluminum housing
provides thermal cooling
achieving L70 at 50,000 hours in
IC and non-IC applications
GASKETS
• Closed cell gasket achieves
restrictive airflow and wet
location requirements without
additional caulking
OPTICS
• Precision acrylic light guide
organizes source flux into wide
distribution with 1.2 – 1.4 spacing
criteria useful for general area
illumination
LED
• Mid power led array provide
a uniform source with high
efficiency and long life.
• Available in 90 CRI minimum,
R9 greater than 50 and color
accuracy within 3 SDCM provide
color accuracy and uniformity
DRIVER
• Integral 120V 50/60Hz constant
current driver provides noise free
operation.
• Continuous, flicker-free dimming
from 100% to 5% with select
leading or trailing edge 120V
phase cut dimmers.
• Dimming to 5% is best assured
using dimmers with low end
trim adjustment. Consult dimmer
manufacturer for compatibility
and conditions of use. (Note
some dimmers require a neutral
in the wallbox.)
• Inline electrical quick connect and
E26 adapter (provided) provides
mains connections.
MOUNTING/RETENTION
• Adjustable spider plate allows
for quick installation into both
junction boxes and recessed
housings.
• Friction blades included
ELECTRICAL JUNCTION BOX
MOUNTING
• The SMD may be used in
compatible electrical junction
boxes in direct contact with
insulation including spray foam
insulation.
• Suitable for installation in many
3-1/2” and 4” square, octagon,
and round electrical junction
boxes.
• Installer must ensure
compatibility of fit, wiring and
proper mounting in the electrical
junction box. This includes all
applicable national and local
electrical and building coded
RECESSED HOUSING MOUNTING
• May be installed in IC recessed
housings in direct contact with
insulation
Note: Not for use in recessed
housing in direct contact with
spray foam insulation. Refer to
NEMA LSD 57-2013.
Friction Blade 4”
• Precision formed friction blades
included
• For retrofit in 4” nominal
housings
• Friction blade design allows
the SMD to be installed in any
position within the housing
aperture (360 degrees)
DESIGNER SKINS
(SOLD SEPARATELY)
• SMD skins are accessory rings
in both round and square. These
skins attach to the SMD for a
permanent finish. Refer to the
SMD accessories specification
sheet for details.
- Matte White (Paintable)
- Satin Nickel
- Tuscan Bronze
WARRANTY
• Five year limited warranty,
consult website for details.
www.eaton.com/lighting/legal
COMPLIANCE
• cULus listed / certified for use
with Halo housings, classified for
use with other’s housings, see
instruction sheet for conditions of
acceptability.
• Wet and Damp Location listed,
airtight per ASTM-E283
• Suitable for use in closets,
compliant with NFPA® 70,
NEC® Section 410.16 (A)(3)
and 410.16 (C)(5)
• EMI/RFI emissions per FCC 47CFR
Part 15B
• Contains no mercury or lead and
RoHS compliant.
• Photometric testing in accordance
with IES LM-79-08
• Lumen maintenance projections
in accordance with IES LM-80-08
and TM-21-11.
• Can be used for State of
California Title 24 high
efficacy luminaire compliance,
reference the California Energy
Commission Title 20 Appliance
Efficiency Database for current
listings.
• Can be used for International
Energy Conservation Coe (IECC)
and Washington State Energy
Code high efficiency luminaire
compliance
SMD4 Series
4 inch Round and Square
SMD4R
SMD4S
4” Surface Mount
Downlight
Suitable for ceiling
or wall electrical
junction boxes
Suitable for 4” recessed
housing retrofit
Non-conductive
Dead Front
ENERGY DATA
Round Square
Lumens
(5000K models)
786 810
Input Power 9.7 W 10 W
Input Current 0.0811 A 0.0829 A
Efficiency 81 lm/W 81 lm/W
THD
13.3 13.2
Input Voltage
120V
Frequency 50/60 Hz
CRI 90 CRI
Power Factor 0.99
T Ambient -30 - +40°C
Sound Rating Class A
Refer to ENERGY STAR® Qualified Products List.
Can be used to comply with California Title 24 High Efficacy requirements.
Certified to California Appliance Efficiency Database under JA8.
Note: For Direct mount product please refer to the SLD6-DM spec sheet.
HALO
Catalog #
Type
Project
Comments
Date
Prepared by