Talon Architectural Area Luminaire
TALON ARCHITECTURAL AREA LUMINAIRE TABLE OF CONTENTS Performance + Versatility.................................3 Automotive Solutions .......................................5 Quality + Durability .........................................7 Control + Efficiency .........................................9 Specification Features ....................................13 Options + Accessories ...................................15 Steel Poles + Brackets....................................
SITE + PARKING IMPENETRABLE FORM Coupling precise mechanical design with premium quality materials, the Talon site light is constructed to sustain the rigors of outdoor operation. Thick wall die-cast aluminum construction and channel set silicone gasketing form an impenetrable IP65 barrier optimizing optical efficiency and fixture longevity in the harshest of environments.
3 4 PERFORMANCE + VERSATILITY OPTICAL VERSATILITY Never before has a single luminaire supported this magnitude of optical choices, touting four [4] distinct families of optical assemblies, all with compelling performance. Hydroformed, segmented, vertical and specialty application optical systems allow finely tuned site lighting solutions with unprecedented levels of uniformity and control.
OPTICAL SOLUTIONS AS DIVERSE AS THE ENVIRONMENTS THEY ILLUMINATE. Exterior lighting requirements continue to grow more stringent with added emphasis on light control and system efficiency. Whether the goal of your site lighting design is safety, general illumination or highlighting prominent features, Talon offers application-specific optical solutions that provide the highest level of photometric performance and control.
5 6 AUTOMOTIVE SOLUTIONS
OUTDOOR SITE LIGHTING THAT ENGAGES CUSTOMER AWARENESS. Exterior site lighting provides the first impression of an automotive dealership and is an outward expression of image. During daytime hours the exterior site lighting fixture form should be selected to lend focus to dealership architecture and branding. For evening operation, properly illuminated uniform site lighting will entice customers, drawing them into the dealership.
7 8 QUALITY + DURABILITY DURABLE CAST CONSTRUCTION Low-copper alloy die-cast aluminum construction offers corrosion resistance while precise tolerance control ensures tight nesting of the door and housing. Combining heat extracting reveal channels with independent optical and electrical chambers that isolate heat producing sources, the Talon’s housing design is both functionally relevant and aesthetically pleasing.
CONFIDENCE-INSPIRING QUALITY BEYOND THE SUM OF ITS PARTS. From the stainless steel hinges to the rugged housing, every detail of the Talon construction is precisely designed with industry leading craftsmanship. Heavy-wall die-cast aluminum construction, premium TGIC [triglycidyl isocyanurate] polyester powder coat paint and an IP65 rated optical cavity ensure Talon can endure the harshest environments.
9 10 CONTROL + EFFICIENCY LUMINAIRE CLASSIFICATION The IESNA’s revised Luminaire Classification System [TM15-07 revised] creates a new basis of measurement for site lighting visibility and adjacent property interaction. This technical memorandum subdivides the luminaire distribution into smaller angular zones and subzones to more clearly represent how much light is emitted at various angles. The values for each subzone give an indication of the appropriate use for the luminaire within an application.
STEPPING UP TO THE CHALLENGE. As visual research advances so too the core understanding of how light interacts with surrounding communities and nocturnal environments. Utilizing this knowledge, Federal programs, national organizations and industry leaders institute guidelines for illuminating an area safely and securely while reducing energy, eliminating spill light and minimizing glare. Talon steps up to the challenge, offering innovative solutions to regulatory compliance issues.
13 14 SPECIFICATION FEATURES MOUNTING Extruded 8" [TLM Talon Medium] or 10 1/2" [TLL Talon Large] aluminum arm includes internal bolt guides allowing for easy positioning of fixture during installation to pole or wall surface. Standard single carton packaging of housing, square pole arm and round pole adapter for contractor friendly arrival of product on site.
Certifications IP65 Rated U.L. 1598 Listed ISO 9001 CSA Listed 25°C Ambient NOTE: In Flat Glass configurations only. FINISH Housing and arm finished in a 5 stage premium TGIC polyester powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. Standard colors include black, bronze, grey, white, dark platinum, and graphite metallic. RAL and custom color matches available. Consult the McGraw-Edison Architectural Colors brochure for the complete selection.
15 16 OPTIONS + ACCESSORIES [MS] [Arm Mount] ARM MOUNT Standard 8" [TLM] or 10 1/2" [TLL] extruded aluminum arm features internal bolt guides for twin support rods. Round pole mounting accommodated by utilizing provided round pole adapter between the fixture arm and pole shaft. EXTERNAL MAST ARM ADAPTER [MS] Cast aluminum mast arm adapter secures fixture head to nominal 2" [2 3/8" O.D. pipe size] horizontal steel tenon arm.
OPTIONS [Factory installed and shipped complete with luminaire] Electrical F=Single Fuse [120, 277 or 347V] FF=Double Fuse [208, 240 or 480V] Q=Quartz Restrike EM=Quartz Restrike w/Delay [Also Strikes at Cold Start] EM/SC=Quartz Emergency Separate Circuit PT=Electrical Power Tray [Standard on TLL] P=Button Type Photocontrol [TLM Only] R=NEMA Twistlock Photocontrol Receptacle HL=Hi/Low Dimming [Vertical Optics Only] L=Lamp Included [R] Shields + Doors HS=Internal House Side Shield VS=Polycarbonate Vandal Sh
17 18 STEEL POLES + BRACKETS ISOTACH WIND MAP This map has been included to aid in pole selection with regard to geographic location. Although a less stringent 25-year mean recurrence map is sometimes used by other pole suppliers, it is our belief that the added measure of assurance offered with the use of this map deems it more desirable. NOTE: This wind map is intended as a general guideline only. Consult local engineering standards to determine the exact wind loading conditions for your application.
FROM ANCHOR BOLTS TO LUMINAIRE AND EVERYTHING IN BETWEEN. Cooper Lighting offers a comprehensive line of steel and aluminum poles, brackets and mounting accessories to complete your site lighting application. Visit www.mcgraw-edison.com to view McGraw-Edison’s entire collection of mounting options. STEEL POLES [Specification Features] Handhole Handhole assembly 3" x 5" on RTS and 5" and 6" on RSS and SSS poles, 2" x 4" on 4" RSS and SSS poles Fixture Mounting Drilled or Tenon [Must specify].
19 20 ALUMINUM POLES + PHOTOMETRICS ALUMINUM POLES [Specification Features] Fixture Mounting Drilled or Tenon [Must specify]. Shaft 6005-T6 aluminum alloy with polished finish. Base 356-T6 cast aluminum alloy shoe base with aluminum alloy knock-in bolt covers or base cover dependent on base type. Handhole Flush reinforced 2 3/8" x 4 1/2" for 4" shafts. Handhole assembly with internal reinforcing frame. 3" X 5" for 6" shafts, 4" x 6" for 7", 8" and 10" shafts.
PHOTOMETRICS [Complete IES files available at www.cooperlighting.
21 22 TLM TALON MEDIUM ORDERING INFORMATION SAMPLE NUMBER: TLM-400-MH-MT-3F-FG-BK-HS PRODUCT FAMILY 1 TLM=Talon Site Medium LAMP WATTAGE 2 70=70W 100=100W 150=150W 175=175W 250=250W 320=320W 3, 4 350=350W 3, 4 400=400W 4 LAMP TYPE MH=Metal Halide MP=Pulse Start Metal Halide HPS=High Pressure Sodium VOLTAGE 5 120=120V 208=208V 240=240V 277=277V 347=347V 480=480V DT=Dual-Tap 6 MT=Multi-Tap 6 TT=Triple-Tap 6 5T=5-Tap 6, 7 DISTRIBUTION LENS TYPE Horizontal Lamp FG=Flat Glass 2F=Type II Formed SG=Sag Glass
TLL TALON LARGE ORDERING INFORMATION SAMPLE NUMBER: TLL-1000-MH-5T-SL-FG-BK PRODUCT FAMILY 1 TLL=Talon Site Large LAMP WATTAGE 250=250W 320=320W 2 350=350W 2 400=400W 750=750W 875=875W 2 1000=1000W 3 LAMP TYPE MH=Metal Halide MP=Pulse Start Metal Halide HPS=High Pressure Sodium VOLTAGE 4 120=120V 208=208V 240=240V 277=277V 347=347V 480=480V DT=Dual-Tap 5 MT=Multi-Tap 5 TT=Triple-Tap 5 5T=5-Tap 5 DISTRIBUTION LENS TYPE Horizontal Lamp FG=Flat Glass 2F=Type II Formed SG=Sag Glass 3, 6 2S=Type II Segmented
Cooper Lighting Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 International Sales, USA Cooper Lighting 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 F: 770-486-4801 P: 770-486-4800 F: 770-486-4801 www.cooperlighting.