User's Manual

RFM300 (Bronze)

RFM300W (White)

Congratulations. You have just purchased a Cooper Lighting digital wireless

communication system. The battery operated landscape motion sensor con-

tains a radio frequency (RF) transmitter. The twin par floodlight contains a RF

receiver and can be mounted to a standard junction box. When the sensor

detects motion, it automatically sends a signal to the receiver, which turns

on the floodlight.

What you need

• Phillips screwdriver

• Electric drill

• 1/8" drill bit

• Outdoor weatherproof silicone caulking

• (4) "AA" alkaline batteries

• Safety Glasses

• Hammer or mallet

What’s included

• Battery operated landscape motion sensor (A)

• (2) 6-32 Light fixture mounting screws (B)

• Light fixture (receiver) (C)

• Coverplate gasket (D)

• (2) 8-32 Light fixture mounting

screws (E)

• Wire nuts (F)

• (2) Floodlight bulbs (G)

• Stainless steel post mounting screws (H)

• Motion sensor post (I)

• Motion sensor spike (J)

What to know

PLEASE READ THESE IMPORTANT SAFETY INSTRUCTIONS.

• For outdoor use only.

• UL/cUL

LISTED for wet locations.

• Landscape motion sensor must be powered by (4) AA Alkaline Batteries

(6VDC Rating)

• Floodlight must be connected to a 120V

olt, 60Hz power source. Any other

connection voids warranty.

ENGLISH

Call for customer service and/or missing

or damaged parts (800-334-6871)