Cut Sheet

ManualsBrandsCooper Power Systems ManualsConnectorsDeadbreak Elbow Kit

General

Eaton terminates high-voltage underground cable

on deadfront apparatus such as transformers,

switches and switchgear with its Cooper Power™

series 600 A, 15/25 kV Class BOL-T™ deadbreak

connector. It is fully shielded, submersible and

meets the requirements of IEEE Std 386™-2006

standard – “Separable Insulated Connector

Systems”.

The capacitive test point on the insulating plug

provides a means of testing the circuit without

disturbing the bolted connection.

In addition to the capacitive test point feature

on the insulating plug, Eaton offers an optional

capacitive test point similar to the test points

on its Cooper Power series 200 A Elbows. This

allows the use of the Type “TPR” faulted circuit

indicators, and provides a hotstick operable means

of determining circuit condition when used with

high impedance voltage sensing devices designed

for test points.

BOL-T connectors are designed for use on solid

dielectric cable (XLPE or EPR) with extruded semi-

conductive shields and concentric neutral, with or

without a jacket.

Installation on jacketed concentric neutral cable

may require additional sealing material. Cold

shrinkable adapters are available for tape shield,

linear corrugated and drain wire cable adaptation

for use with deadbreak connectors.

600 A 15/25 kV class BOL-T™

deadbreak connector

Deadbreak Connectors

Catalog Data

CA650 003EN

Effective February 2015

Supersedes January 2015

COOPER POWER

SERI ES

Summary of content (8 pages)

PAGE 1
Deadbreak Connectors Catalog Data CA650003EN Effective February 2015 Supersedes January 2015 COOPER POWER SERIES 600 A 15/25 kV class BOL-T™ deadbreak connector General Eaton terminates high-voltage underground cable on deadfront apparatus such as transformers, switches and switchgear with its Cooper Power™ series 600 A, 15/25 kV Class BOL-T™ deadbreak connector. It is fully shielded, submersible and meets the requirements of IEEE Std 386™-2006 standard – “Separable Insulated Connector Systems”.
PAGE 2
Catalog Data CA650003EN 600 A 15/25 kV class BOL-T deadbreak connector Effective February 2015 900 AMP rating Table 1. Voltage Ratings and Characteristics The BOL-T connector is rated for 900 A continuous when used with a coppertop compression connector, copper insulating plug, copper stud and copper bushing or junction. If a 900 A rating is desired, specify a “C” as the 9th digit when determining your part number. See Step 3, page 5.
PAGE 3
Catalog Data CA650003EN 600 A 15/25 kV class BOL-T deadbreak connector Effective February 2015 SEMI-CONDUCTING SHIELD Precision molded peroxide-cured semi-conducting shield provides ground shield continuity and meets the requirements of IEEE Std 592™-2007 standard. 9.6" (244 mm) HEX HEAD One-inch hex head is used to tighten the connection. INSULATING PLUG CAP Semi-conducting rubber cap fits over insulating plug test point for waterproof seal and deadfront shielding. COMPRESSION CONNECTOR 12.
PAGE 4
Catalog Data CA650003EN 600 A 15/25 kV class BOL-T deadbreak connector Effective February 2015 Ordering information Step 2 – Select digits 8 and 9 conductor code Each BOL-T Connector Kit contains: Identify the conductor size and type in Table 4 and select the CONDUCTOR CODE from the appropriate (compression or shear bolt) column.
PAGE 5
Catalog Data CA650003EN 600 A 15/25 kV class BOL-T deadbreak connector Effective February 2015 Table 4.
PAGE 6
Catalog Data CA650003EN 600 A 15/25 kV class BOL-T deadbreak connector Effective February 2015 Accessories Cable adapters, compression connectors, and other accessories that can be used with BOL-T connectors are described in Catalog Data CA650007EN, “Deadbreak Accessories, Tools, and Replacement Parts.” Table 5.
PAGE 7
600 A 15/25 kV class BOL-T deadbreak connector Catalog Data CA650003EN Effective February 2015 This page intentionally left blank. www.cooperpower.
PAGE 8
Catalog Data CA650003EN 600 A 15/25 kV class BOL-T deadbreak connector Effective February 2015 Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Eaton's Cooper Power Systems Division 2300 Badger Drive Waukesha, WI 53188 United States Cooperpower.com © 2015 Eaton All Rights Reserved Printed in USA Publication No. CA650003EN Eaton, Cooper Power, and BOL-T are valuable trademarks of Eaton in the U.S. and other countries.