User guide

Programming Reference - Reporting 7510r
Page 52
IP Port 1
Key in the port number that Downloader “listens” to
on the remote PC at IP address 1.
IP Address 2
Key in an alternate IP Address used by Downloader.
IP Port 2
Key in the port number used by the alternate IP
address.
Secure Callback
Select
Downloading
,
Secure Callback
to allow Downloader to
use a third callback number (independent of the
telephone numbers in the
Downloading, Phone Book
option). Before making a Downloader connection, the
remote PC operator keys in the third callback number.
Once connected Downloader transmits the number to the
control unit. The control unit then uses that number to
call back to the remote PC.
Modem Baud Rate
Over some noisy telephone lines Downloader
communicates more effectively using a slower Baud rate
from the control unit. Select
Downloading
,
Modem Baud
Rate to change the baud rate to 300 baud.
Reporting
The Reporting option in the Installer Menu contains all the
options needed to program how the control unit will
communicate alarms. Within the Reporting options, each
menu item deals with the following areas:
Alarms
Deals with all the programming necessary for
reporting to Alarm Receiving Centres (ARC).
Social Care
Deals with setting up reporting for social care alarms.
A user can start this type of alarm by pressing the
Social Care Alarm button on the keypad or by
activating a pendant. The control unit can start this
type of alarm when it detects inactivity in a suitably
programmed zone (see page 22).