User`s guide

35

You can manually override a time
switch by pressing 0, then pressing
r to toggle its current status.
Time Switch 1
On (1) >00:00
5. You will see a screen similar to the one
shown opposite if you have chosen to
edit an on/off time. The number in
brackets indicates whether it is in the
first, second or third pair of on/off times.
Enter the time in 24-hour format, (e.g.
2100 for 9:00pm), then press [.
Continue from step 4 or press ] to exit.
1 Operates On :-
> ..............
6. You will see a screen similar to the one
shown opposite if you have chosen to
edit the days of operation. The number
in the top-left corner indicates whether it
is associated with the first, second or
third pair of on/off times.
Press 1 to 7 to toggle days on/off,
then press [. Continue from step 4 or
press ] to exit.
Option 2-0-2:
Setting Up Auto-Set
Timers
This option enables you to define up to
three auto-sets timers. Each is associated
with one or more wards, which
automatically set and unset at the specified
times.
You can define each auto-set timer to have
up to three pairs of switch on (set) and off
(unset) times. You can also choose the days
of the week that each of these operate.