Operator`s manual

SPECIFICATIONS
MODEL CS 208
10
System Power Connections and Precautions:
RE: (+) chassis equipment.
The Nagra 4.2, IVS must have a separate supply, with no common power supply connections to the mixer or other (-)
chassis equipment.
Input:
Reference: -8PPM, 0VU (XLR’s are pin 2 high).
Mic In:
(Transformer balanced)
Minimum input level -83 dBu (Z in 1.4k !)
Maximum input, line position (no pad) +28 dBu (Z in 10k !)
Pad 15 dB Z in " 600!
Mic/Line 40 dB Z in " 10k!
Combined 55 dB Z in " 10k!
High Pass Filters:
Hp 1 Pre-transformer 100Hz -6 dB/oct.
Hp 2 Post-transformer & pre-Amp. 70Hz -12 dB/oct.
EQ:
High frequency +/- 12 dB @ 10 kHz
Mid frequency +/- 15 dB 500 - 5 kHz
Low frequency +/- 12 dB @ 100 Hz
Insert: Send/direct out, pre-fader -5 dBu Z
out
= 47! (+4 dBu with boost)
Return -5 dBu Z
in
= 5k!
Direct out (post-fader): -2 dBu Z
out
= 47!
O/L indicator: -3 dB MOL
Limiter:
Threshold Variable* -6 PPM to M. O. L. (+4 PPM typ.)
Attack Slow 100 ms
Fast* 10 ms
Release Slow 500 ms
Fast* 100 ms
* Standard Setting
(M. O. L. = maximum output level = 25 dBu on XLR outs, +19 dBu on unbalanced outs.)
Pan pots: Center = -3 dB
All specifications are measured with the pan pots panned either L or R.
Right Page
Right Page