Operator`s manual

Output:
Reference -8 PPM, 0VU (XLR’s are pin 2 high)
XLR balanced outputs:
A, B, C, D & Aux. 1, 2 +4 dBu, Z
out
! 100"
TQG & DB 9 unbalanced outputs:
(ABCD) -2 dBu, Z
out
! 100"
Phones 1 out: 0 dBu no load
0 dBu 60" load
Phones 2 &3: -3 dBu no load
-8 dBu 60" load
Maximum load is 25" for each output:
Tape return (balanced) -14 dBu to + 19 dBu Z
in
= 10k"
Communication in (balanced) -14 dBu to + 19 dBu Z
in
= 10k"
Ext. slate in (unbalanced) -60 dBu to - 38 dBu Z
in
= 5k"
Mix bus in - current input - R. series 5k" -8 dBu (-10 dBV)
10k" -2 dBu
(needs series resistors) 20k" +4 dBu
Signal (M. O. L.) to noise of output section:
(Dynamic range)
(Channel faders off, masters at max) -115 dB 20-20 kHZ
Slate subtone 27 Hz (at -16 PPM, -8vu)
SPECIFICATIONS
MODEL CS 208
11
Left Page
Left Page