Operator`s manual

BASIC SET-UP & METERING

MODEL CS 208

OPERATING GUIDLINES

1. Set master faders (including Aux) at maximum. *

2. Adjust internal oscillator for -8PPM (0VU) on the

mixer meters (If necessary).

3. Adjust input of recorder for it’s required reference level.

* Lowering the master faders, will reduce the headroom of the system.

Most of the mixer’s are equipped with PPM meters. (Black dial, white needle, reference -8.)

Tape Return:

Set up as above.

Meters to tape.

Adjust trim pots on output module panel for -8PPM (0VU).

Analog recorder

with VU meters

Adjust Input for 0VU

Analog recorder

with peak meters

eg: Nagra

-8dB

modulometer

DAT,

Digital Camera

-18, -20dB*

CS208

PPM

CS208

Ref. Level -8PPM

Ref. Level 0VU

(Master pot at max)

Levels

* refer to manufacturer’s specifications

Left Page