Manualshelf

Operator`s manual

ManualsBrandsCooper Sound ManualsAudio MixerCS 208
27282930313233343536
MODEL CS 208
32
AN 3 - COMMUNICATIONS IN - MULTIPLE INPUTS
The communications input can be used with multiple inputs (eg: 2 boom operators) by using a special adapter cable
(see below).
The communication in connector on the rear panel is balanced.
Tip = Hi, Ring = Low, Sleeve = ground.
For multiple inputs, the ring should be grounded. This is done either by use of a mono jack plug for the adapter cable, or
using a stereo jack plug & shorting the ring to sleeve.
The resistors shown in the diagram are necessary to provide some isolation between two or more sources.
Right Page
Right Page