Operator`s manual

INPUT MODULE
MODEL CS 208
2
Right Section
16. Gain : Mic / Line preAmp gain.
17. HF : High frequency amplitude control.
18. MF 500, 5k : Mid-frequency select.
19. MF : Mid-frequency amplitude control.
20. LF : Low frequency amplitude control.
21. S : Invert phase option to B & D busses. 1 pair of channels could be used
to decode a M / S microphone configuration.
22. A1 : Aux 1 send (the aux sends are not affected by the AB,
CD mix bus switches).
23. PF / AF : Selects pre or after fader for Aux 1 send.
24. A2 : Aux 2 send.
25. PF / AF : Selects pre or after fader for Aux 2 send.
26. Pan : L = A and/or C, R = B and/or D.
Example: A out only. AB switch in, CD switch out,
Pan L (left).
27. Channel fader.
See specifications & application notes for further details.
Right Page
Right Page