Operator`s manual

OUTPUT MODULE
MODEL CS 208
3
Phones 2 & 3
1. PL : Private line assign to phones 2 or 3
(down = on). See master PL switch (27).
2. Main/Aux : Selects main (ABCD) or Aux 1 & 2 to
phones 2 or 3.
(Aux 1 = L out, Aux 2 = R out.)
3. AB / CD : When main is selected, this switch selects
either AB or CD to L, R of the phone outs.
4. Rotary Select Switch :
X = phones 2 or 3 follows the phones 1 selection.
Example: Playback to phones 2 & 3 for director/
script critique. (Switch phones 1 to tape).
L = A, C or A1 to both outputs. (ie: Mono to L & R
headphone capsules). See (2 & 3).
ST = A, C, A1 to left capsule B, D, A2 to right
capsule. See (2 & 3).
R = B, D, A2 to both outputs. See (2 & 3).
5. Phones 2/3 level :
Gain adjustment.
Aux 1, Aux 2
6. Aux 1, 2 master level controls.
Returns
7. Trim pots (multi-turn) to adjust return (tape) level to
phones 1 & meters.
Meter Section
8. CD/Aux : Meters 3, 4 = CD or Aux outputs
(3 = C or A1, 4 = D or A2).
9. PFL : Meters 1, 2 can indicate PFL selected on the input
channels. (Momentary switch).
10. T/D : Tape/Direct. Meters indicate the return signals.
(1 = A, 2 = B, 3 = C, 4 = D). CD/Aux switch (8)
overides the tape return.
Phones 1
11. PL : Private line assign to phones 1 (down = on) see master
PL switch (27).
12. Comm : Communications return to phones 1 only. (down = on).
(Talkback to phones 1) (see app. notes for 2 returns).
Left Page
Left Page