Operator`s manual

REAR PANEL

MODEL CS 208

1. Phones 2 : Stereo 1/4” jack.

2. Phones 3 : Stereo 1/4” jack.

3. Fuse : 2.5A (5 x 20mm).

4. Ext. Power In : Pin 1 = negative DC, Pin 3 = Battery charge (positive), Pin 4 = Positive DC

(see specifications).

5. A, B, C, D, A1, A2 : Balanced XLR outputs (Pin 2 high)

6. Unbalanced Outs (TQG) : ABCD Pin 1 = ground, Pin 2 = signal.

7. Unbalanced Outs (DB9) : ABCD.

8. Mix Bus In : ABCD (current input).

9. Comm. In : Talkback to phones 1. Balanced input. Stereo 1/4” jack.

10. Slate : External slate mic input. Mono 1/4” jack.

11. Roll 1, 2 : See pin outs.

12. Returns : ABCD Balanced in. Stereo 1/4” jack.

13. Ch. Dir. Out : Channel direct out, post fader. Mono 1/4” jack.

14. Ch. Insert : Can be direct out, pre-fader (see board A layout). Unbalanced stereo 1/4” jack.

15. 2 spare holes : Option for stereo input channels.

Left Page