Use and Care Manual

www.cooperwiringdevices.com 2-HSBRSPSH6-1008
2-Pole, 3-Wire Grounding
15A, 125V
20A, 125V
Hospital Grade
TVSS Receptacles
Application
Hospital Grade Products
Specification & Performance Data
P
roject Name: Prepared By:
Project Number: Date:
C
atalog Number: Type:
Hospitals and other health care facilities are filled with sensitive electronic equipment, which everyone depends on for the critical
function of daily operations. While substantial transient voltage that can damage this electronic infrastructure is initiated from
outside the physical building in the form of lighting strikes and grid switching, few realize that the majority of transients are born
from within. Elevators, for instance, create a constant supply of transients that continuously attack the electronics of sensitive
equipment. Cooper Wiring Devices’ Hospital Grade TVSS Receptacles are manufactured from high impact thermoplastics and boast
e
xceptional clamping and surge current ratings. They are available in Isolated Ground and non-Isolated Ground versions with
optional audible alarms to indicate bad ground connections or that surge protection has expired.
Materials
Face
Base
Strap
Line Contacts
Terminal Screws
Ground Screw
Testing & Code
Compliance
• Listed to UL 498 and UL 1449, file no. 2369.
• CSA Certified to C22.2, no. 42, file no. 7087.
• Listed to UL 498 and UL 1449, file no. 2369.
• CSA Certified to C22.2, no. 42, file no. 7087.
Specifications:
Environmental
Electrical
Mechanical
Nylon
Nylon
0.050” Thick Solid Brass, Zinc Plated
0.037” Triple Wipe Brass
#8-32 Brass, Neutral Screw Nickel Plated
#8-32 Brass (green)
Nylon
Nylon
0.050” Thick Solid Brass, Zinc Plated
0.037” Triple Wipe Brass
#8-32 Brass, Neutral Screw Nickel Plated
#8-32 Brass (green)
Flammability meets UL 94 requirements; V2 rated.
Temperature rating: -40ºC to 60ºC (-40°F to 140°F).
Dielectric Voltage: withstands 2000V per UL 498
Current interrupting: yes, at full-rated current
Temperature Rise: max. 30ºC (86°F) after 100 cycles of overload
Terminal Accommodation: #10 - #14 AWG
Voltage ratings permanently marked on device
Flammability meets UL 94 requirements; V2 rated.
Temperature rating: -40ºC to 60ºC (-40°F to 140°F).
Dielectric Voltage: withstands 2000V per UL 498
Current interrupting: yes, at full-rated current
Temperature Rise: max. 30ºC (86°F) after 100 cycles of overload
Terminal Accommodation: #10 - #14 AWG
Voltage ratings permanently marked on device
Receptacle Type Duplex Isolated Ground Duplex
8200_S, 8300_S Series IG8200_S, IG8300_S Series
Wiring Type Back & Side Wire Back & Side Wire