Use and Care Manual

3
eaton www.cooperwiringdevices.com
Technical Data
Effective February 2014
Aspire RF switch (no neutral required version)
Project Name: Prepared By:
Project Number: Date:
Catalog Number: Type:
Figure 1. RF9518
Product Dimensions
1.80”
(45.7mm)
1.29”
(32.6mm)
4.20”
(106.6mm)
2.61”
(66.4mm)
1.36”(34.5mm)
3.28”
(83.3mm)
Parameter Description Value range
1 Delayed OFF *0 to 127
-128 to -1
2 Panic ON time *0 to 127
-128 to -1
3 Panic OFF time *0 to 127
-128 to -1
4 Basic set value Not used
5 Power up state 1=OFF, 2=ON, 3=Last state
6 Panic mode enable 0=OFF, 1=ON
7 Not used Not used
*The configuration value is a signed single byte number. This value may represent a value with no units or may represent a value such as time. 0 to 127 (decimal) represents 0 to 127
seconds of time. -128 to -1 (negative decimal numbers) represents 128 to 255 seconds as calculated by this formula.
Config value = desired time in seconds (or desired value) -256
For an example of 172 seconds: config value = 172 - 256 = -84 (decimal) or 0xAC (hex)
Table 5. Device Configuration Parameters
Association Groups for RF9518
Group 1 5 nodes maximum
Group 2 - 254 0 nodes maximum
Group 255 1 node maximum
Table 6. Device Association Information
Compliances, specifications and availability are subject to change without notice.