Installation Guide

2
EATON www.arrowhart.com
Technical Data
Effective October 2014
Slide AL series dimmer
Compliances, specifications and availability are subject to change without notice.
Catalog No. SAL06P Series
Device Type Slide AL Dimmer
Wiring Type Back & side wire
Testing & Code Compliance • cULus Listed to UL1472, file no. E47967
• NOM Certified
Environmental Specifications Flammability: Meets UL 94 requirements; V2 rated
Temperature Rating: -20ºC to 70ºC (-4°F to 158°F)
Electrical Specifications Rating: 120V/AC 60 Hz
Light Intensity Control: Full-range, continuously variable dimming
Dimming Performance: Square Law Dimming curve Solid State Dimming
Radio Frequency Interference: Designed to reduce interference with radio, audio and video
equipment
Power-failure Memory: Light returns to same level prior to power interruption
Lamp Ratings: 300W Dimmable LED/CFL 600W Incandescent, Halogen, Dimmable
Fluorescent, Electronic Low-Voltage, Magnetic Low-Voltage
Mechanical Specifications Wiring Types: Single-Pole & 3-Way
LED Indicators: Load status indicator
Voltage Ratings: Permanently marked on device
The Slide AL series dimmer provides full-range classic linear-slide dimming for 300W dimmable CFL and LED as well as 600W
incandescent, halogen, dimmable fluorescent, electronic low-voltage & magnetic low-voltage light sources. These units are ideal for
residential and light commercial applications and are compatible with Eaton’s wiring devices’ decorator style devices and wallplates. The
preset “ON/OFF” switch automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is
designed for both single-pole (one location) and 3-way (multi-location) applications, and features a fixed rapid start setting that provides a
very short power burst to ensure lamp start-up at low dim settings.
Catalog No. SAL06P Series
Top Housing Polycarbonate
Bottom Housing Polycarbonate
Strap Aluminum
Form Factor Decorator
Finish Gloss
Table 2. Specifications
Applications
Table 3. Materials
Project Name: Prepared By:
Project Number: Date:
Catalog Number: Type:
Table 4. De-Rating Chart - 600W Models
Table 5. Color Ordering Information
For ordering devices, include Cat. No. followed by the color code: A (Almond), BK (Black),
GY (Gray) LA (Light Almond), V (Ivory), W (White)
A BK GY LA V W
Almond Black Gray Lt. Almond Ivory White
Lamp Type 1-Gang 2-Gang 3-Gange +
LED/CFL 300W max. 300W max. 300W max.
INC, HAL, ELV 600W max. 600W max. 600W max.
MLV 600VA max. 600VA max. 600VA max.
FLR See Ballast Performance Data pages