Specification

2
EATON www.arrowhart.com
Technical Data
Effective July 2015
Combination USB charger with
tamper resistant duplex receptacle
Compliances, specifications and availability are subject to change without notice.
The Arrow Hart USB duplex receptacle provides quick and convenient access to charge virtually any electronic component including smart
phones, tablets, e-readers, cameras and MP3 players. The specification grade device is built to withstand the tough demands of the
commercial environment while also providing code compliance with 2014 NEC
®
article 406.12 that requires tamper resistant receptacles in
dwelling units.
Applications
Project Name: Prepared By:
Project Number: Date:
Catalog Number: Type:
Catalog no. TR7755 & TR7756 series
Device type USB combination charger with tamper resistant duplex receptacle
Wiring type Wire leads
Testing & code compliance cULus Listed to UL498 and UL1310, File no. E15058
Environmental specifications Flammability: Meets UL94 requirements; V2 rated
Temperature rating: -20ºC to 60ºC (-4ºF to 140ºF)
Electrical specifications:
AC output
Dielectric voltage: Receptacle withstands 2000V per UL498
Temperature rise: Receptacle - max. 30ºC (86ºF) after 100 cycles of overload @ 150% of
rated current (DC)
Electrical specifications:
DC output
Switching frequency: Typical 140 kHz
Output voltage: Nominal 5V (+/- 10%)
Protection: Current limiting and thermal shutdown protection
Output current: Constant current maximum 3.1A
Mechanical specifications Terminations: Device can be wired using #14 or #12 AWG wires, three 6" pre-stripped wire
leads for line, neutral and ground, #14 AWG for TR7755 and #12 AWG for TR7756
Catalog no. TR7755 & TR7756 series
Top housing PC
Bottom housing PC
Strap 0.045" thick steel, zinc plated
Auto ground clip Phosphor bronze
Line contacts 0.030” thick brass
Ground contact 0.014” thick brass
Terminal screws N/A (wire leads)
Ground screw N/A (wire leads)
Tamper resistant Reliable Delrin
®
shutter assembly
Table 2. Specifications
Table 3. Materials
Table 4. Color ordering information
For ordering devices, include Cat. no. followed by the color code: A (Almond), B (Brown),
BK (Black), GY (Gray), LA (Light Almond), V (Ivory), W (White)
A B BK GY LA V W
Almond Brown Black Gray Lt. Almond Ivory White
Wiring diagram
Green ground
Vert terre
Verde tierra
Ground/terre/tierra
green or bare
vert ou nu
verde o descubierto
White
Blanc
Blanco
White
Blanc
Blanco
Neutral/Neutre/Neutro
Hot
Phase
Vivo
Black/Noir/Negro
Hot
Phase
Vivo