Instructions / Assembly

MATERIAL CHARACTERISTICS
• Environmental: Flammability meets UL 94 requirements; V2 rated
• Temperature Rating: 0ºC to 40ºC (32°F to 104°F)
TESTING & CODE COMPLIANCE
• cULus Listed to UL244A & UL1472, file no. E325082
• NOM Certified
• Vacancy Sensor California Title 24 compliant
• Reverse Mode allows light to stay off in a room
when motion is detected.
• Occupancy Sensors time delay default set to 5
m
inutes; Vacancy Sensors time delay default
set to 30 minutes.
• Occupancy Sensor provides a selectable
ambient light override preventing lights from
switching ON when there is acceptable natural
light.
• Occupancy Sensor Version allows to toggle
between Auto-ON/Auto-OFF or Manual
ON/Auto-OFF mode with a simple press and
hold of switch.
• Occupancy Sensor provides for a bypass
feature to allow the sensor to perform as a
traditional switch (Manual ON/Manual OFF).
• Vacancy Sensor meets California 2008 Title 24.
• Electrostatic discharge protection.
• No leakage to load in off mode.
• Uniform color matched PIR lens to device
housing.
• Color change faceplate kits provide for a
simple in field change.
• Mid-Size decorator wallplate included with
product.
• Neutral required for installation of device.
FEATURES
• Full-range Preset dimming control provided
with horizontal dim/bright bar.
• Digital circuitry provides aesthetically
pleasing soft-ON/fade OFF that extends bulb
life.
• Preset and light level change is easily shown
with horizontal row of green LEDs.
• Works will popular load types: Halogen,
Incandescent and Magnetic Low-Voltage.
• Single green LED indicates load status,
provides locator light in dark and blinks to
indicate motion detection.
• LED serves as air-gap switch disconnecting
power from load, forcing an OFF condition.
• Push pad design provides minimal travel and
crisp actuation.
• Replaces a standard light or fan switch.
• Provides 180 degree field of view and 1000
sq. ft. of major motion coverage.
• Selectable time delay of 5 seconds (test), 5
minutes, 15 minutes and 30 minutes for
lights to remain on after room is vacated.
• Walk-in-delay feature allows sensor to turn
lights off without time delay when motion is
detected briefly in room.
SAVANT Occupancy & Vacancy Sensor Dimmer Controls
Wallbox Lighting Controls
www.cooperwiringdevices.com
P
roject Name: Prepared By:
Project Number: Date:
C
atalog Number: Type:
SAVANT Occupancy & Vacancy Sensor Dimmers, Wire Leads
426
Catalog No.
Rating For Lamp Type(s) Description Color Suffix
600W/VA Incandescent, Halogen Occupancy Sensor & Dimmer
■■
OS106D1-___
120V/AC Magnetic Low Voltage with LEDs, Single-Pole A, BK, GY, LA, V, W
600W/VA Incandescent, Halogen Vacancy Sensor & Dimmer
■■
VS106D1-___
120V/AC Magnetic Low Voltage with LEDs, Single-Pole, A, BK, GY, LA, V, W
Title 24 Compliant
–– –– Color Change Kit
■■
SCKD-___-BP
A, BK, GY, LA, V, W
Color Ordering Information
For ordering, include Cat. No. followed by the color code: A (Almond), BK (Black), GY (Gray), LA (Light Almond), V (Ivory),
W (White)
Single-Pole
6
00W/VA
Incandescent, Halogen, Magnetic Low-Voltage
SAVANT
Sensor Dimmer
Controls