User guide

Page ii
© Cooper Security Ltd. 2012
IN NO EVENT WILL COOPER BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL , OR INDIRECT LOSS OR DAMAGE,
INCIDENTAL DAMAGES, STATUTORY DAMAGES, EXEMPLARY DAMAGES, LOSS OF PROFITS, LOSS OF REVENUE, LOSS
OF ANTICIPATED SAVINGS, LOSS OF BUSINESS OR OPPORTUNTIY, LOSS OF GOODWILL OR INJURY TO REPUTATION,
LIQUIDATED DAMAGES OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. COOPER‟S
LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO A PRODUCT SHALL IN NO CASE EXCEED THE PURCHASE
PRICE OF THE PRODUCT FROM WHICH THE CLAIM ARISES. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE
LIMITATIONS AND EXCLUSIONS WILL APPLY WHETHER COOPER‟S LIABILITY ARISES FROM BREACH OF CONTRACT,
BREACH OF WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), STRICT LIABILITY, BY OPERATION
OF LAW, OR OTHERWISE.
Every effort has been made to ensure that the contents of this book are correct. The contents
of this book are subject to change without notice.
Printed and published in the U.K.
This manual applies to the Menvier40 and Menvier100 control units with version 4.03 software.
For Your Safety
This book contains several passages alerting you to potential problems or hazards. Each of
these are marked by the words Note, Caution or WARNING.:
Note:
Describes conditions that may affect the proper functioning of the equipment
(but will not damage the equipment).
Caution:
Describes actions that will physically damage the equipment and prevent its
proper function.
WARNING:
Describes actions that are hazardous to health, or cause injury or death.
Please pay particular attention to these marked passages.
Terminology
With the introduction of BS8243 and PD6662:2010, Cooper Security have changed the name
“panic alarm” to “hold up alarm” and “PA” to “HUA”.
Other Publications for the Menvier40 and Menvier100:
The following guides are available from the Cooper Security website:
www.coopersecurity.co.uk
Quick User Guide
Brief instructions for setting and unsetting alarm systems
based on Menvier40/100/300 control units.
Menvier40/100/300 Engineering
Guide
A detailed description of the Installer‟s programming
options.
Menvier40/100/300
Administrator‟s Guide
Detailed notes for the system administrator of an alarm
system based on the Menvier40/100/400.
Web Server Setup Guide
Instructions on how to configure a Windows PC or laptop to
use the Menvier40/100/400‟s built-in web server for
installation programming.
Cooper Downloader Quick Guide
Instructions for how to install Cooper Downloader on your
PC or laptop, and connect to Menvier40/100/300 Control
Units.
Menvier Updater Installation
and User Guide
Instructions on how to install Menvier Updater on your PC
and use it to update the software on your
Menvier40/100/300 control unit.
www.coopersecurity.co.uk
Product Support (UK) Tel: [phone].
Available between:
08:30 to 17:00 Monday to Friday.
Product Support Fax: [phone]
email: [e-mail]
Part Number 12232039 4/5/2012