BBQ Grill Gazebo 8ft x 5ft with Hard Top INSTRUCTION MANUAL To inquire about replacement parts, please email to teamaftersale@outlook.com.
INSTRUCTION MANUAL WARRANTY Please read and save these instructions before attempting to set up this gazebo. 1 Year Limited Warranty We warrant for a period of 1 year from the original date of purchase, this product against any defects in materials or workmanship. At its discretion, we may provide replacement parts to original purchaser. Original receipt or proof of purchase as well as proof of defect is required. We will not be responsible for shipping costs incurred outside the continental USA.
INSTRUCTION MANUAL PACKAGE INCLUDES Parts List No. Parts QTY. No. Parts QTY.
INSTRUCTION MANUAL PACKAGE INCLUDES Parts List No. Parts QTY. No. Parts QTY.
INSTRUCTION MANUAL PACKAGE INCLUDES Hardware No. Parts QTY. No. R Parts QTY.
INSTRUCTION MANUAL SET UP THE GAZEBO Step 1 Attach foot pad (P) to Leg (A) using 4 pcs screws (Z2). Repeat the above steps for leg (A1). Insert tubes (O) into cross connector (I1). Connect the two of tube (F) into both ends of cross connector (I1), fix them with 2pcs screws (V). Connect tube assembly between leg (A) and leg (A1) with screws (S). V A S A1 I1 F O F Z2 O P I1 O Step 2 Attach T shape part (J2) on the both ends of tube (J1) with 2pcs screws (X).
INSTRUCTION MANUAL SET UP THE GAZEBO X Step 3 Attach foot pad (P) on leg (B) and with 4 pcs screws (Z2), Repeat the above steps for leg (B1). Fix tube (C) with screws (X) at the top of leg (B) and leg (B1); Use screws (X) to connect steel triangle plate (Q) to legs (B) and (B1). C 1060 Q 910 X B Ensure that the middle holes of the 2 cross bars are on the same side and close to the A1 B1 leg tube.
INSTRUCTION MANUAL The hole faces inward SET UP THE GAZEBO M M Step 5 Attach tube (F1) between the bottom of legs (A) and leg (B) with screw (S). Attach tube (I) to triangle plate (Q) J on legs A and B with screw (X). Place mesh bar (J) above the crossbar (J1) and secure I with screw (Y). Repeat process on legs (A1) and leg (B1). Install (M) on cross bars (C), fix it with F1 screw (T), ensure the hole faces inward and the gap faces outward on both bars.
INSTRUCTION MANUAL SET UP THE GAZEBO Step 7 Slide PC board (K) into the (D), (D1), and (G) frame assembly. Attach tube (G) using brackets (L) to complete the frame. Repeat the above steps to (E), (E1), and (G) frame assembly.
INSTRUCTION MANUAL SET UP THE GAZEBO U Step 8 U M Place the (E) roof assembly on the tube as pictured. Use screw (U) to connect tube (E)/(E1) to legs (A1) and (B1). Attach the roof assembly to legs with (M) bracket with screws (U). E1 A1 M E Step 9 Place the (D) roof assembly on the tube as pictured. Use screw (U) to connect tube (D)/(D1) to legs (A) and (B). Attach roof assembly (D) to roof assembly (E) at the center with screwds. Place assembled roof board assembly on the top as pictured.
INSTRUCTION MANUAL SET UP THE GAZEBO Step 10 Secure the gazebo to soft ground by inserting a stake (Z3) through the foot of each leg. The gazebo may be anchored to concrete using suitable concrete anchors (not included).
