User`s manual

[SETUP-REC-EVENT(S/D)]

Fig3.2.18 Setup sensor detection

 SENSOR DETECTION: Each channel matches a relevant Sensor, for example, Channel 2 is linked to

Sensor 4, if the Sensor 4 gives alarm, the alarm information will be given on the picture by channel 2

(Fig3.2.18 Setup sensor detection), the “□” means that the channel can not be detected, “V” means that the

channel can be.

 OPTIONS: (Fig3.2.19 Setup record time)

 POST-RECORD TIME: The length of the record time after alarm triggered. You have five options to

choose: 10 seconds, 30 seconds, 1 minute, 5 minutes and 10 minutes.

 PRE-RECORD TIME: The length of the record time before alarm triggered. You have five options to