User`s manual

105
Because RAID box sends the RAID log message to DVR through COM port, please select
the actual COM connection.
Step 2: Authentication
If RAID Box provides password authentication, DVR will prompt the following dialog
box to ask you to enter password.
If password authentication is failed, below message will show up. Please retry again.
Step 3: Select RAID/JBOD mode
There are two modes for selection, RAID or JBOD.
 Select JBOD mode
If you select JBOD, DVR will prompt you the following message.
If you click “Ye s”, the following message will occur and reboot DVR after you press
“OK” to finish the RAID configuration.