User`s manual

40
(2) Select “Set Detection Area” and use the mouse to drag an area to be detected.
(3) You can set many detection areas by dragging mouse again.
13-2 Method Two
(1) Click
(2) Select “Clear Detection Area” and use the mouse to drag a non-detection area.
(3) Drag the mouse again to set more non-detection areas.
14. Color Adjustment: Here you can adjust Contrast/ Brightness/ Hue/ Saturation. The “Hide
Sensor Area” setting is to help you examine the adjustment.
Color Adjustment function is also provided in the one channel monitor mode. That means
user also can adjust color in single monitor mode except that “ Administrator “ enables
“Hide Color adjust” in “ System” page under “System configuration” for security
concern. (Please refer to the Chapter 5-7 for “System” setting).
15. OSD (On Screen Display) Position: you can select where the “time” and “camera name”
will be displayed in the image in live view. There are four positions to choose from: Top
Left, Top Right, Bottom Left and Bottom Right.