User`s manual

 Step 7

Before dialing, the Connect window has several text fields to fill. Your User name will be

your entire official USF e-mail address and the Password will be the password to that e-mail

address, respectively. In addition, you may check the Save password box and/or customize

the phone number (to disable call-waiting or other features) if you prefer.

 Step 8

Your connection setup is now complete! If you have not payed for USFBasic Dial-up yet,

please do so at the

HiConnect MarketplaceH. Qualified faculty must register through the

HFaculty Modem Pool Eligibility pageH. Both Web addresses are respectively listed below

for your convenience.

Users can open the Web Browser now, enter SuperVision IP address(see Note), and wait for

several seconds (time for loading program) to start remote monitoring function.

Note

After successful connecting to the modem, the PC will be assigned an IP Address, which is the

successor number of SuperVision’s IP Address. For example, if the IP address of SuperVision

is 140.113.17.154, then 140.113.17.155 will be assigned to the PC. Therefore, you need to use

this IP address in IE browser in order to connect to the DVR system.