User guide

1
I. IMPORTANT SAFEGUARDS
a) This apparatus must be connected to Earth. This installation should be made by
made by a qualified installer.
b) Do not carry out electrical installations in wet weather conditions.
c) Voltage must to be matched with P/T.
d) Examining connection , to sure that is correct.
e) Please not to put the P/T with auto scanning continuouly for long time.
II. Summarize
This unit is a hi-tech CCTV product which incorporates panoramic speed-variable PAN/TILT,
multifunctional decoder, CPU processor, memory chip into a whole. It can largely reduce
connection and installation processes of components in the system, rise up reliability of the system
and facilitate installation and maintenance. Therefore it has advantages of beautiful appearance,
compact structure and easy operation.
1、 Integrated Multi-Protocol Decoder
a.
With integrated decoder and multi-protocol, it can integrate 16 kinds of
communication protocols in maximum. As its baud rate of communication can
be adjusted, it is compatible with many normal systems by easy setup inside the
dome camera, so it has stronger versatility.
b.
RS485 serial control: addresses of unit 1-511.
2、 Integrated Speed-Variable PAN/TILT
a. Turning
0--355ºhorizontally and an adjustable speed from 0.25 - 10 rad/s; turning
-90 -- +20º vertically with a speed up to 10 rad/s.
b.
Running stably at low speed with super lower noise. Pictures have no shaking.
3、 High Intelligent Degree
a.
As much as 64 preset positions can be preset with powerless memory
b.
The P/T can scan horizontally between two points and scan speed can be
modified.
c.
Six sets of programmable tour locus with 16 position each set. The running
speed and the detention time are adjustable respectively;
4、 Could to be cooprated with outdoor housing ,also could control camera that in housing
a. Camera’s iris、focus、zoon could to be manual controlled.
b. Control auto iris shutter speed.
c. Auto white balance tracking.
III. P/T SETUP
1、 ADDRESS SET