Intelligent Control Keyboard Manual Operation Please read the operation manual carefully before using 1
SAFETY PRECAUTIONS CAUTION RI SK OF ELECTRI C SHOCK. DO NOT OPEN! CAUTION: TO REDUCE THE RI SK OF ELECTRI CAL SHOCK, DO DOT OPEN COVERS. NO USER SERVI CEABLE PARTS I NSI DE. REFER SERVI CI NG TO QUALI FI ED SERVI CE PERSONNEL The l i ght i ng f l ash wi t h a ar r owhead symbol , i n an equi l at er al t r i angl e, i s i nt ended t o al er t t he user . Ther e i s uni nsul at ed “ danger ous vol t age” pr esence near by t he pr oduct ' s encl osur e whi ch may be r i sk of t o per sons .
Contents Notes for Attention………………………………………………………………4 Ⅰ、The first chapter Panel and functions ……………………………………….6 1.1 Front Panel…………………………………………………………………...6 1.2 back Panel……………………………………………………………………7 1.3 Technical Parameter………………………………………………………….8 、The second chapter Operation Specification………………………………….9 2.1 Please keep all the packing documents……………………………………………9 2.2 Dimension……………………………………………………………………9 2.3 Exterior connecting introduction………………………………………………9 2.
Notes for Attention: This manual is to help you use the product correctly, before using for the first time, make sure read the manual carefully, the safe information and other attentions in terms mentioned will help you use this products well. ¾ Electric safe Observe all national and area electric safety standards in application. Adopt DC12V/1.
a. Lines of power supply and control are broken b. Using the wrong power supply type or voltage c. fall or cover is broken d. Capability in Products is abnormal e.
Ⅰ、The first chapter Panel and functions Such Keyboard is a product supporting with Intelligence Dome Camera, decoder and other terminal receivers. It connects to the receiver by EIA/RS-485 electric interface. Without the bus driver, one keyboard at most to control 32 domes or decoders, and the longest communication distance is 1.2Km.
1.2 Back Panel Picture 2 ①Power interface ②Brightness of LDC screen adjustable press ③Power、communication interface ④Video interface S.N. Name Mark POWER 1 Remark Connect to exterior steady power supply input DC12V/1A DC voltage from the interface, Power interface standard power adapter can be used directly.
1.3 Technical Parameter Communication Integrate 16 protocols , band rate from 2400bps 、 4800bps、9600bps、19200 bps adjustable. Control RS-485,can control many front end equipments such as dome, decoder, intelligent P/T, etc. directly. Joystick control 3-Axis shift joystick, control P/T, lens.
、The second chapter Operation Specification 2.1 Please keep all the packing documents Please keep the original packing documents after opening the packing in order to packing the keyboards to send to the agent or factory to deal with if problems have. 2.2 Dimensions Picture 3 2.3 Exterior connecting introduction When connecting with other equipments, can’t be connected crossed, must connect with the corresponding pole.
2.4 Display after power on When the keyboard is powered on, there will be displayed the address of current dome, baud rate, protocol code and version code, such information will be displayed for 10 seconds. If the user has known the information, can operate the keyboard directly, such information will be disappeared automatically.
z press number: “1-128” z press: CALL ¾ Delete presets CLEAR z press clear and number z press PRESET ¾ start up tracking z press number: “1-6” z press: SHOT ¾ setup the left point of the line scanning z press: AUTO z press: ON ¾ setup the right point of the line scanning z press: z press: AUTO OFF ¾ running the line scanning z Press Number z Press AUTO Explain: some protocols do not need to setup the line scanning, just run the line scanning directly.
z Press VIDEO ¾ Lens Control z Far zoom z Far focus FAR Near focus NEAR z Big iris OPEN Small iris CLOSE WIDE Near zoom TELE ¾ Assistant Function z Press FUNC, key in number“0-10” Corresponding functions of different numbers refer to table -1 z Press ON Table 1(if the function is out of control, probably such protocol is not support such operation) NUM KEYBOARD OPERATION CONTROL OBJECT FUNC+N+ON FUNC+N+OFF On Off Force On Auto switch 1 Backlight Compensation 2 Low LUX(D/N
Press MENU to enter menu press and again to exit menu. After enter the menu, move the joystick up or down to move the cursor up or down; move the joystick left or right to adjust the content of current menu. 2.6.1 MAIN MENU at “PROTOCOL SETTING” item, move the joystick to right, display the submenu “PROTOCOL SETTING”. Move the joystick up or down to choose the menu item, and move the joystick right or left to setup the parameter.
¾ BACK At such item, move the joystick right or left to display the submenu (MAIN MENU) 2.6.2 CAMERA SETTUP At the main menu item “CAMERA SETTUP”, move the joystick right to display the submenu “CAMERA SETTUP”. Move the joystick up or down to choice the menu item and move the joystick right or left to setup the parameter. ¾ BACK LIGHT moves the joystick at such item right or left to CAMERA SETTI NG 1.BACK LI GHT 2. I CRSHOT 3. I RI S 4. D- ZOOM 5. FOCUS 6. WB 7. OSD OF CAM 8.
such submenu, move the joystick right or left to move the active cursor right or left, and move the joystick up or down to add or reduce the content of current menu item. SEQ:XX(XX is the current editing tracking number), after edit the tracking, press CLOSE to exit and save the current setup. ¾ RUN PATROL move the joystick at such item right or left to change the tracking number among 01- 06. And press OPEN to run the tracking.
Problem REASONS PROBABLY No Video No power supply Can not control the appoint dome or Pan/Tilt 1.Incorrect protocol 2.Incorrect baud rate 3.Incorrect address Possible Solution 1.Check the connection of power line 2.If the power supply is DC12V 1.The protocol is same between keyboard and dome or Pan/Tilt? 2.The baud rate is the same between keyboard and dome or Pan/Tilt? NOTE: The above lists some common causes problems, as well as solutions for reference purposes only.
AppendixⅡ: Maintenance service terms 1、Service range In one year the cargo sold, the problem is approved caused by product material or techniques defect, manufacturer will repair or replace for free; Warranty period of all parts which have repaired or replaced is 90 days after sending out cargoes; Products can’t be repaired for free for manpower cannot dispute reason(such as war, earthquake, lightning strike),improper use, deviant operation, revise, normal fray or problem caused by accident; Facto