User Manual

ManualsBrandsCOP-USA ManualsCamerasCC25NVD-H

CC25NVD‐H

User'sManual

ThesebuttonsarelocatedattheBackoftheCamera

PressthecenterButton toEntertheOSDMenu.

MoveUporDowntomovethruthemenuoptionsandleftorrightto

changevaluesonthemenu,

Pressthecenterbuttonagaintogetintosubmenus.

Alwaysremembertosavebeforeyouexit.

WhenyouHighlighttheReturnOption,press

therightbuttontoeitherexit,

saveandexitorjustreturn.

Summary of content (7 pages)

PAGE 1
User's Manual CC25NVD‐H Press the center Button to Enter the OSD Menu. Move Up or Down to move thru the menu options and left or right to change values on the menu, Press the center button again to get into sub menus. Always remember to save before you exit. When you Highlight the Return Option, press the right button to either exit , save and exit or just return.
PAGE 2
1. EXPOSURE DEFAULT HLI AREA Lens: DC IRIS (Use this feature when using a DC Lens) Go to Submenu and adjust the settings: E.Shutter (1/60 ~1/100000) Bright (001~100) DC REF (000~20) ELECTR.( use this feature when using i a non‐DC DC LLens)) E.
PAGE 3
2. COLOR WB MODE: ATW ( Auto Tracking White Balance) It Automatically adjusts the color between 1.800K and 10500K. Use this option if the lighting conditions changes constantly MANUAL(Adjust the color manually) Adjust the RED and BLUE settings with values ranging from 0~255 M.WB R (000~128) M.WB B(000~128) AWC>PUSH Adjust the white balance by focusing at a white object or white sheet of paper and press enter to adjust the color.
PAGE 4
3. DAY & NIGHT C‐SUP and A‐SUP:(000~100) Default is 40. Use these settings to reduce the color or aperture settings. For this function to work, the 3D DNR must be OFF. The Higher the number, the higher is the supression. MODE: BURST: AUTO (BURST /DAY>NIGHT/NIGHT>DAY/DWELL TIME) Camera switches from Color to B/W depending on the illumination of the scene. ON When this is selected, a COLOR ‐ B/W picture will be shown .This will increase the noise .
PAGE 5
4. FUNCTION MIRROR ON This Option allows you to mirror the image horizontally OFF Disables the feature SHARPNESS (0~30) Adjust the Image Sharpness decreasing or Increasing the Values LSC (Lens Shading compensation) which compensates brightness of four lens’ corners. So that the LSC function activates to get a clear image effectively. Is recommended to leave it OFF. ON ‐ SET LEVEL (0~30) 5. MOTION MOTION DET. (ON/OFF) This Function allows to identify the area where the motion is detected AREA SELECT.
PAGE 6
. PRIVACY MASK (1~8) This camera has up to 8 masking areas. These 8 Masking Areas can be setup anywhere in the screen. and each mask can be enabled or disabled anytime. MODE (ON/OFF) 7. SETUP Title: (ON/OFF) If you choose to have a User Title, change this option to On, then select it. This will allow you to manually insert a title by selecting each individual character.
PAGE 7
8. SYSTEM CAMERA ID: N/A COMMUNI.:N/A LANGUAGE: ENGLISH/CHINESE 9. EXIT EXIT FACTORY SET:(YES/NO) This feature restores the factory default settings. SAVE & EXIT: Saves the Changes and Exit the OSD.