Owner manual

구
b.
Make the cable through the hole and fix the
base on the ceilling.
Note: if install outdoor, please coat silicone
gel on the base.
d. Install the bracket
Note:if outdoor, please use silicone gel and
rubber belt
d. Install the dome housing
Note, if outdoor, please use waterproof tapes,
if the ceilling is too low, we may install on the
base directly.
e. Connection of cables
According to the connection identifier
1.2. Installation for indoor speed dome.
1.2.1 Carefully read the operation manual
and the point for attention.
1.2.2 Carefully set the communication code,
baud rate and address of the high speed
dome camera and make confirmation they
are correct.