Network Video Server / IP Camera User Manual V3.0.
Preface Thank you for choosing our product. Instructions: The manual will show all of our IP camera operations and performances in details IP Camera mentioned in the manual refers to network camera DVS as mentioned in the manual refers to network video server The manual takes the IP address of 192.168.168.
Safety notice This content is designed to ensure that user can use this product correctly, so as to avoid risk or property loss. Please read this operational manual carefully before using this product, and keep the manual properly for future reference. Precautions are divided into 2 parts: “Warning” and “Notice” as shown below: Warning: serious injury may be resulted when the warning item is ignored. Notice: property loss may be resulted when the notice item is ignored. Warning: 1.
Contents PREFACE ................................................................................................................................................... 2 1. 2. 3. 4. PRODUCT DESCRIPTION ............................................................................................................ 5 1.1. MAIN FUNCTIONS AND FEATURES ............................................................................................... 5 1.2. APPLICATION …. ............................................
1. Product Description This DVS/IP Series, has a embedded real-time tasks operation system (RTOS) and embedded processor, compared to PC platform, this product have a highly efficient system operation; its codes are stored in FLASH memory that improves the stability and reliability of the system. This DVS/IP Camera has a advanced H264 compression technology to compress the video signals and transmit the data through network. Remotely, users can access to a real-time video and voice view.
Network Video Server/IP Camera User Manual 1.2. Application Fields Applicable to all kinds of environments that need network remote monitoring, e.g.: Network Monitoring for ATM, banking counter, supermarket, factory, etc.; Offer remote monitoring service for nursery, kindergarten, school, etc.; Smart door access system; Property management in smart building or smart estate Unattended monitoring system at electric plant or station, telecom substation, etc.
Network Video Server/IP Camera User Manual 1. 2. 3. 4. When opening the package, please check carefully the Packing List, see if all items are there. Read the Manual Carefully before installation; Turn off the Power while installing the IP Camera. Check the power voltage to prevent any damage to the equipment; 2.2. DVS/IP Camera appearance and interface definition 2.2.1. Appearance of complete machine: 1) IP Camera appearance 2.2.2.
Network Video Server/IP Camera User Manual E. Reset button, it is used to restore factory default parameters of device, including IP address and user password. F. RS485 interface G. Power supply interface, connecting to 12V DC through voltage stabilizer, please use matching voltage stabilizer power supply. H. 1 channel alarm input/output 2.3.
Network Video Server/IP Camera User Manual Step I: Connect DVS/IP Camera to network by network cable Step II: Plug the equipped power adaptor to DVS/IP Camera power socket, then connect with external electricity Step III: Turn on the computer, connect to front-end DVS/IP Camera, and then conduct software setting Instructions: Also may connect the DVS/IP Camera with computer directly 3. DVS/IP Camera access 3.1. DVS/IP Camera login 3.1.1.
Network Video Server/IP Camera User Manual and Dial-up connections” menu, click the “Local Area Connection” icon of the network card connecting to video server, right click and select “Property”, select “Internet Protocol (TCP/IP)” in pop up “General” page, click “Property” to pup up the page as shown below: set up network parameters of computer Select “Use the following IP address”, and fill in IP address 192.168.1.99 (or other IP address in the same network segment not conflicting with 192.168.1.
Network Video Server/IP Camera User Manual Setup network parameters of computer Select “Use the following IP address”, and fill in IP address 192.168.1.99 (or other IP address in the same network segment not conflicting with 192.168.1.100), the subnet mask is 255.255.255.0; the default gateway address is 192.168.1.1. No other setting is required; click the “OK” of this page and the “OK” of the “Local Area Connection Properties”. Wait the system to complete the configuration.
Network Video Server/IP Camera User Manual Click『Local Settings』on menu bar to pop up local setting diagram 12
Network Video Server/IP Camera User Manual The method of adding DVS/IP Camera in local LAN is as follow: Click『Search』button to pop up the setting box as follow 13
Network Video Server/IP Camera User Manual Step 1: select the device to be added in the search list Step 2: click『Add』button on the Search dialog box to pop up the setting box as follow 14
Network Video Server/IP Camera User Manual Step 3: type Local Name defined by user Tick『Enable auto login server』, when you login the server next time, you need not to type user name and password and can login the device automatically. Step 4: after the setting is finished, return to the main interface of software, double click the added device in the device list, and then double click the channel below the device to preview the video.
Network Video Server/IP Camera User Manual Step 1: click the pull down option box of Host Type; select the device type to be added. Step 2: type remote address (fill in IP address or domain name) of device in Address field. Step 3: type the Local Name defined by user. Step 4: set data port number of device in Command Port, the port number of DVS/DVS/IP Camera/37 Series network DVR is 8200 by default, this port number can be defined by user, and fill in according to the data port in network setting.
Network Video Server/IP Camera User Manual 3.2. Access DVS/IP Camera through IE 3.2.1. IE Plug-in Installation and Login When accessing to DVS/IP Camera through IE (Internet Explorer), you must install the video plug-in firstly. If you have installed the digital video central management software, then you will not need to install IE video plug-in anymore.
Network Video Server/IP Camera User Manual Now the system will prompt you to install ActiveX control as shown above; if above dialog box does not appear, then set the safety setting of IE explorer, the detailed setting is as follow: 1) Open IE explorer, click “Tool” on menu bar. 2) Select “Internet Option” in pull down list. 3) Select “Internet”, then click “Customized level(C)…”, select Enable or Prompt in the options of “ActiveX control and plug-in”, and set Safety Level to Low.
Network Video Server/IP Camera User Manual 4) Click “OK” to save and exit, refresh to access DVS/IP Camera address.
Network Video Server/IP Camera User Manual 3.2.2. IE real time browse operation In real time browse page, you can carry out video image recording, snapshot, talkback, PTZ etc operations.
Network Video Server/IP Camera User Manual Interface function description Click this button to open or close channel picture. Click this button to carry out snapshot to front end video. Click this button to enable talkback function with front end DVS/IP Camera. Click this button to enable talkback function with front end DVS/IP Camera. Click this button to switch between audio enable and disable. Click this button to enable rain strip function. Click this button to enable lighting function.
Network Video Server/IP Camera User Manual Control Zoom, Focus, and aperture of camera Set and call the preset position of PTZ Click this menu to switch to real time preview interface Click this button to switch to record playback interface Click this button to pop up parameters setting diagram Click this button to exit login 3.2.3. IE record playback operation In record playback page, you can carry out query, playback and download etc operations to the recorded files.
Network Video Server/IP Camera User Manual Setting the time interval of record query Query result, double click record file to play After record files for download are selected, click this button to download. When multiple files are down loaded at the same time, click this button to see the download tasks. Click this button to browse and play the down loaded record files. Click this button to play the record file. Click this button to pause the playing of record file.
Network Video Server/IP Camera User Manual 4. DVS/IP Camera parameters setting There are two methods to enter DVS/IP Camera Parameters Setting Interface; the operations are detailed as follow: Method 1: Use IE to access DVS/IP Camera, after login, click “Setting” on the page to enter DVS/IP Camera Parameters Setting Interface.
Network Video Server/IP Camera User Manual 『Channel』2/4 channel DVS, select different channel to configure 『Channel Name』set the channel name of camera 『Encode Mode』support 3 streams: main stream, sub-stream, mobile steam 『Encoding Format』set encoding format, support H.264 『Frame Rate』set the frame rate of encoding, which means how many frames of image DVS/IP Camera can compose in 1 second.
Network Video Server/IP Camera User Manual Color setting Functional description of options 『Channel』2/4 channel DVS, select different channel to configure 『Brightness』adjust the brightness degree of picture 『Contrast』adjust the ratio between brightest and darkest areas of picture 『Saturation』adjust the vividness of picture color 『Hue』adjust the hue of picture 『Sharpness』adjust the sharpness of each detail shadow and its border 『Noise reduction』adjust digital noise value 『Auto color balance』enable this func
Network Video Server/IP Camera User Manual 『Scene』four options available in pull down list: outdoor, indoor, manual and auto 『Automatic diaphragm』adjust the diaphragm of lens 4.3. OSD Setting Profile OSD is an abbreviation of On Screen Display, used in CRT/LCD displayer to create some special words or graphics on the screen of displayer, helping users to acquire some assistant messages. OSD Setting includes the setting of OSD/MASK.
Network Video Server/IP Camera User Manual characters. Date and time will be displayed at left upper corner of the screen; description of channel will be displayed at the scope of 0~image resolution broad band on X-axial and 0~ image resolution height on Y-axial.
Network Video Server/IP Camera User Manual Network Setting Functional description of options 4.4.1 Automatically acquire IP address When this option is selected, DVS/IP Camera will acquire a dynamic IP address from DHCP server; if DHCP server is not available, then use manually assigned IP address at present. 4.4.2 Use fixed IP address When this option is selected, you can manually assign a legal IP address in IP address field.
Network Video Server/IP Camera User Manual 『Set Talkback IP』it is the IP address of client receiving message when talkback request is sent, this function is an expanded function and not available yet. 『Server Name』Name of the server, convenient for memory; e.g. if the server is placed at No. 888 Jiefang Road, then you may name the server as “No.
Network Video Server/IP Camera User Manual COM Setting 4.6.
Network Video Server/IP Camera User Manual Probe Warning Setting Step I: Connect hardware; connect the alarm input equipment with the alarm Input port of DVS/IP Camera correctly Step II: Open the probe alarm setting interface as picture above Step III: According to the type of probe, select『Probe ID and Type』, and define the『Probe ID and Type』by self Step IV: 『Set Arming Time of Probe』, select 『Start』, and set time segment Step V: Set『Time of Alarm Elimination』(1~1800 seconds optional) Step VI: 『Initiate A
Network Video Server/IP Camera User Manual Notice: Must connect it with external dome camera that supports preset position; furthermore, set the preset position in main interface which can be used Step VIII: Tick and select『Linkage Alarm Output』(Optional) Users may connect with external alarm equipment e.g. alarm ring, alarm light, alarm signal, etc.
Network Video Server/IP Camera User Manual Video motion warning Setting Steps of setting Step I: Select『Channel』(multiple channels of DVS/IP Camera are optional) Step II: Select『Video Mobile』among『Warning Category』 Step III: 『Start Auto Snap-shot』(Optional) Auto Snap-shot: after the mobile event occurs, system will automatically send the jpg pictures to all client ends that connected currently Step IV: Step V: Step VI: Step VII: Set the alarm time segment within the options in『Set Alarm Time』, then『Tick
Network Video Server/IP Camera User Manual Skills of setting: 1. In order to avoid the small objects from moving in the image that may cause unnecessary warning, users may set the sensitivity a bit higher; 2. In some areas with frequent movement, users may also set the sensitivity a bit higher in order to avoid constant warning; 3. Only those warning of very subtle movements require a low or extreme sensitivity, normally users are recommended to set a rather high sensitivity 4.8.
Network Video Server/IP Camera User Manual Video loss warning Setting Steps of setting: Step I: Select『Channel』, enter『Alarm Type』, then select 『Video Loss』 Step II: Set the alarm time segment, select arming time and set the arming time segment Step III: Tick and select『Linkage Alarm Output』 The system offers binary probe output for options; users may connect with external alarm equipment e.g. alarm ring, alarm light, alarm signal, etc.
Network Video Server/IP Camera User Manual manually control “On” and “Off” of the warning output relay. The detailed setting is as below. Warning Output Setting Probe output warning setting: 『Output I』Select the type according to the connected warning output equipment 『Output II』Select the type according to the connected warning output equipment 『Name of Switch』May customize the name of switch, or select as default 『Setting』After change the parameters, click this button to save the parameters setting 4.
Network Video Server/IP Camera User Manual DDNS Setting Configurations of PPPoE Step I: Open the options of『PPPoE&DDNS Setting』as above Step II: In PPPoE, fill in the items of 『User Name』and『Password』(acquired from network service provider) Step III: Click『Setting』to save the parameters setting, then the equipment can access to the Wide Area Network (WAN) by dial-up. Instructions of DDNS configuration Currently, ISP mostly offers active IP to us (e.g.
Network Video Server/IP Camera User Manual 4.11. Local setting It is used to set local record and snapshot save path, network buffer and image display mode etc parameters. Local Setting Detailed description of parameters configuration: 『Record Setting』tick the drive letter where records are saved in disk list. 『Network Buffer』when the network speed of remote access is very slow, Network Buffer can be set to improve the smooth of images.
Network Video Server/IP Camera User Manual 4.12. Alarm message You can view probe alarm message, motion detection alarm message, video loss alarm message and disk abnormal error etc other messages in real time.
Network Video Server/IP Camera User Manual 4.13. Mobile Disk Video Recording Mobile Disk Video Recording Setting Specifications of functions DVS/IP Camera supports plugging SD card for recording. The maximum capacity of SD card supported is 32G. Steps of setting disk video recording Step I: Plug the SD card in the SD card interface of DVS/IP Camera.
Network Video Server/IP Camera User Manual card is removed, it should be unloaded firstly. Unload the mobile disk: Step I: Click『Stop Recording』 Step II: Click『Unload Disk』 Step III: Remove the SD card. 4.14.
Network Video Server/IP Camera User Manual Step I: Install FTP server (For detailed methods of installation, please consult the corporate network administrator) Instruction: Recommend to adopt Serv-U series FTP server software Step II: Step III: Tick and select『Start FTP Function』 Fill the IP address and port (default FTP open port 21) into 『FTP Server』 Step IV: Set『User Name』, means the legal user name in FTP server 『Password』is the corresponding password of the legal user name Step V: Set『Catalogue』a
Network Video Server/IP Camera User Manual Email Upload Setting Steps of Email upload setting Step I: Tick and select『Start Email Alarm Upload』 Step II: Set『Email Server』, means the address of mail server used for the sender’s mailbox Users are suggested to use mail server of [smtp.qq.com] or [smtp.sohu.
Network Video Server/IP Camera User Manual recipient will not know that you are sending this email to the recipients that you are inputting in the Copy field. (This function is not supported current). 『Image Attach』 When this option is checked, it will snap shot the images and upload it via email in case of system alarm. 4.16.
Network Video Server/IP Camera User Manual Step IV: Set『Device NO.』, means the serial number of platform server (for our product, it does not need to input the serial number) Step V: Click『save』, save the parameters 4.17. WIFI Setting Profile Here you can set the parameters of 3G network card, WIFI and cell port. 4.17.1.
Network Video Server/IP Camera User Manual acquired after dial success. 4.17.2. WiFi parameters setting In NVClient client side, open “Remote Setting” to pop up “Parameters Setting” dialog box, select “WIFI Setting” option, enable WIFI function in “WIFI Network Parameters” field at the right side, and set correct network parameters, SSID, encrypt mode, work mode and encrypt content (please input according to the prompt of document).
Network Video Server/IP Camera User Manual 4.17.3. Mobile access setting Set mobile access port, the default value is 15961. For the purpose of mobile access, it is required to install mobile monitoring software of attached CD on mobile. Mobile setting 4.18. UPNP setting General After UPNP function is enabled, and then by combining DDNS, you can let your DVS/IP Camera to realize plug and play.
Network Video Server/IP Camera User Manual UPNP Setting 『Enable UPNP』UPNP is not enabled in factory default of camera, tick『Enable UPNP』to enable UPNP function; 『Work Mode』there are 2 options of work mode: Auto Port Mapping and Manual Port Mapping; when Auto Port Mapping is set, DVS/IP Camera will assign mapping port automatically; when Manual Port Mapping is set, it is required to manually set “Remote Data Port”, “Remote Web Port” and “Remote Mobile Port”; 『Net Adapter Type』select to use “wired adapter” o
Network Video Server/IP Camera User Manual 『System Restart』,『System Restore Settings』, etc. Please see the figure as below: System Setting 『Server Time Setup』The system offers the function of calibration to the time of client end for remote DVS/IP Camera; When it confirms the time of client end is correct, click “Set”, then video server will work by the time of client end.
Network Video Server/IP Camera User Manual Before upgrade, please contact technician of our Technical Department, and the upgrade shall be conducted under our technician’s instructions The network must not break off during the process of upgrade Power supply of DVS/IP Camera shall be stable during the process of upgrade The DVS/IP Camera will automatically restart when the upgrade finishes; please do not make any operation before the system successfully run up again.
Network Video Server/IP Camera User Manual 4.20.
Network Video Server/IP Camera User Manual Appendix I Operating instruction of DDNS I. Steps of setting netnvr DDNS Note: it is not required to additionally apply netnvr DDNS, you only need to input DDNS user name and domain name that you want to apply in DDNS setting interface. Step 1: modify the IP address of device, the IP address is required to be the network segment used in normal times, that is, the IP for the internal network of the router.
Network Video Server/IP Camera User Manual Step 2: log in client side software --> Remote Setting --> PPPOE&DDNS Setup --> Enable DDNS --> select netnvr DDNS network provider Step 3: input user name and domain name that you want to apply in DDNS setting interface, click “Save” to save.
Network Video Server/IP Camera User Manual Step 4: set UPNP or set port mapping on the router. In the IE, input IP of router into the router, normally find the mapping options of router port, commonly as “Virtual Server”, “NAT Setting” or “Port Transferring”, etc.
Network Video Server/IP Camera User Manual (Setting Virtual Server, Web Port: 80, add DVS IP address: 192.168.168.72) (Setting Virtual Server, Data Port: 8200, add DVS IP address: 192.168.168.
Network Video Server/IP Camera User Manual Virtual Server List Step 5: try to use the domain name applied just now to access DVS/IP Camera; if you can access normally, then your application is successful. II. Steps of setting DynDNS DDNS Step 1: log in the official website of DynDNS http://www.dyndns.com Step 2: register DynDNS account and apply an available domain name.
Network Video Server/IP Camera User Manual Step 3: modify the IP address of device, the IP address is required to be the network segment used in normal times, that is, the IP for the internal network of the router.
Network Video Server/IP Camera User Manual Step 4: log in client side software --> Remote Setting --> PPPOE&DDNS Setting --> Enable DDNS --> select DynDNS DDNS network provider Step 5: input user name, password and domain name that you have applied in DDNS setting interface, click “Setting” to save.
Network Video Server/IP Camera User Manual Step 6: set UPNP or set port mapping on the router, please refer to Step 4 of “Steps of setting netnvr DDNS” for the method of port mapping. Step 7: try to use the domain name applied just now to access DVS/IP Camera; if you can access normally, then your application is successful.
Network Video Server/IP Camera User Manual Appendix II Alarm input, output device connection 1.
Network Video Server/IP Camera User Manual 2.
Network Video Server/IP Camera User Manual DVS Wiring Socket Its maximum working volt should not exceed 110V Alarm output device Alarm power supply (Maximum AC: 110V, 1A, 110W) DVS Wiring Socket High Voltage(exceed 110V)、High Current Alarm output device Circuit Breaker Circuit Breaker Power Supply Alarm output device power supply Note: after alarm output device is connected well, it is firstly required to set well linkage alarm input of alarm input, or manually control alarm output switch in alarm
Network Video Server/IP Camera User Manual Appendix III Default parameters 1. Network parameter 1) Network Video Server and IP Camera default parameters Parameters Default IP address 192.168.1.100 Subnet address 255.255.255.0 Gateway 192.168.1.1 Data port 8200 Web port 80 Mobile port 15961 UPNP Off 2.
Network Video Server/IP Camera User Manual temporarily, and open the firewall of computer after the device is connected normally. Reason 4: the network address of device has been modified, so that the IP address of device and gateway address are not in the same network segment, or the DVS/IP Camera and your PC are not in the same VLAN.