User Manual

ManualsBrandsCOP-USA ManualsVideoDVR2716XD-M

DVR User Manual

For H.264 8/16-channel digital video recorder

Summary of content (105 pages)

PAGE 1
DVR User Manual For H.
PAGE 2
DVR User Manual CAUTION  Please read this user manual carefully to ensure that you can use the device correctly and safely.  We do not warrant all the content is correct. The contents of this manual are subject to change without notice.  This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using the same. Kindly remove the cables from the power source if the device is not to be used for a long period of time.
PAGE 3
DVR User Manual Table of Contents 1 Introduction .................................................................................................................................................. 1 1.1 DVR Introduction ............................................................................................................................................................... 1 1.2 Main Features ................................................................................................................
PAGE 4
DVR User Manual 4.2.1 Live ........................................................................................................................................................................................................ 21 4.2.2 Main Monitor .......................................................................................................................................................................................... 21 4.2.3 Mask .............................................................
PAGE 5
DVR User Manual 4.8 P.T.Z Configuration .......................................................................................................................................................... 38 4.9 Advanced......................................................................................................................................................................... 42 4.9.1 Reset .....................................................................................................................
PAGE 6
DVR User Manual 6.7.1 On LAN .................................................................................................................................................................................................. 53 6.7.2 On WAN ................................................................................................................................................................................................. 55 6.8 Remote Preview .......................................................
PAGE 7
DVR User Manual 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed especially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., which ensure its powerful functions and high stability.
PAGE 8
DVR User Manual  Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK  Record modes: Manual, Schedule, Motion detection and Sensor alarm recording  Support recycle after HDD full  Resolution, frame rate and picture quality are adjustable  8/16 audio channels available  Two record search mode: time search and event search  Support 8 screen playback simultaneously  Support deleting and locking the recorded files one by one  Support remote p
PAGE 9
DVR User Manual  Support event log recording and checking, events unlimited NETWORK  Support TCP/IP, DHCP, PPPoE, DDNS protocol  Support IE browser to do remote view  Support setup client connection amount  Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
PAGE 10
DVR User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please don‟t power up the unit till the physical installation is complete. 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Notice: 1. This series supports eight SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. 2. Please calculate HDD capacity according to the recording setting.
PAGE 11
DVR User Manual Step2: Unscrew and take the barrier out of the front panel. Then connect the power and data cables. Finally, put the DVD with the holder into the case, let the screw holes of the case aim at the holder‟s and screw them firmly. Fig 2-2 Connect the DVD Writer 2.2 Front Panel Descriptions Notice: The front panel descriptions are only for reference; please make the object as the standard.
PAGE 12
DVR User Manual Name Description BACKUP button Info button Search button P.T.Z.
PAGE 13
DVR User Manual Fig 2-3 Rear Panel for 8-CH Fig 2-4 Rear Panel for 16-CH 7
PAGE 14
DVR User Manual Item 1 2 3 4 5 Name HD SD Video in Alarm in HDMI port VGA port LAN 6 USB port 7 8 9 10 11 12 13 14 15 GND K/B P/Z CVBS Audio out MIC in Alarm out Audio in E-SATA Description HD SDI video signal inputs. Alarm Inputs for connecting sensors Connect to high-definition display device VGA output, connect to monitor Network port To connect external USB devices like USB flash drive, USB HDD for backup or updating firmware. Grounding Connect to keyboard. A is TX+, B is TX-.
PAGE 15
DVR User Manual Fig 2-5 Remote Controller Button Power Button Record Button -/-- /0-9 Digital Button Fn1 Button Multi Button Next Button SEQ Audio Switch Direction button Enter Button Menu Button Exit Button Focus/IRIS/Zoom/PTZ Preset Button Cruise Button Track Button Function Switch off—to stop DVR.
PAGE 16
DVR User Manual Wiper Button Light Button Clear Button Fn2 Button Info Button To enable wiper function in PTZ mode To enable light function in PTZ mode To return to the previous interface Unavailable temporarily Get information about DVR like firmware version, HDD information To control playback.
PAGE 17
DVR User Manual below steps:  Activate remote controller to control the DVR: Turn the IR sensor of the remote controller towards the IR receiver on the front panel, press the number key 8 twice on the remote, then input device ID of the DVR to be controlled (Range from: 0-65535; the default device ID is 0) and press ENTER to confirm.  You can check the device ID of a DVR from System SetupBasicDevice ID.
PAGE 18
DVR User Manual Fig 2-6 Digital Numbers and Letters Input Window It supports mouse drag. For e.g. setting up motion detection area, click customized, hold down the left button and drag to set motion detection area. Setting up Schedule: hold left button and drag to set schedule time. In Playback: Click to choose the options. Right click to return to live mode. In Backup: Click to choose the options. Right click to return to previous picture.
PAGE 19
DVR User Manual 3 Basic Function Instruction 3.1 Startup & Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding the life of your DVR. 3.1.1 Startup Step1: Connect with the source power. Step2: The device will boot and the power LED would turn blue. Step3 A WIZZARD window will be pop-up and show some information about time zone，time setup，network configuration, record configuration and disk management.
PAGE 20
DVR User Manual Step2: Click OK. Then the unit will power off after a while. Step3: Disconnect the power 3.2 Login User can login or log off the DVR system. Once logged off the user cannot do any other operation except changing the multi-screen display. Notice: The default user name and password is “admin” and 123456” For complete operational steps for changing password, adding or deleting users. Please refer to section 4.7 User Management Configuration. Fig 3-1 Login 3.
PAGE 21
DVR User Manual 3.3.1 Live Playback Click Play button to play the record. Refer to Figure3-3. User can do complete operation by clicking the buttons on screen.
PAGE 22
DVR User Manual 4 Main Menu Setup Guide Click right mouse or press menu button on the front panel to display the menu tool bar on the bottom of the screen. Refer to Fig 4-1: Fig 4-1 Menu Toolbar Click the icon beside the playback icon to select the time to playback. For example, if 2 minutes is selected and then click playback button, it will start to playback from the past 2 minutes. Dwell: Dwell means to display live images from different cameras in a sequence.
PAGE 23
DVR User Manual Fig 4-2(a) main menu Fig 4-2(b) System Setup 4.1 Basic Configuration Basic configuration includes three sub menus: system, date & time and DST. 4.1.1 System Step1: Enter into MenuSetupBasicSystem. Refer to Fig 4-3: Step2: In this tab you can setup the device name, device ID, video format, max network user, VGA resolution and language.
PAGE 24
DVR User Manual Fig 4-3 Basic Configuration-Basic Show System Time: If selected, displays the current time during live monitoring. Max Online Users: To set the maximum number of concurrent user logins in the DVR. Show wizard: If selected, the GUI would launch the startup wizard on every boot, allowing the user to do basic setup. Video output: The resolution of live display interface, ranges from: VGA800*600, VGA1280*1024 and HDMI. Note： Switching between VGA and HDMI will change the menu output mode.
PAGE 25
DVR User Manual 4.1.2 Date & Time Step1: Enter into MenuSetupBasicDate & Time tab. Refer to Fig 4-4: Step2: Set the date format, time format, time zone in this interface; checkmark “sync time with NTP server” to refresh NTP server date; user can also adjust system date manually. Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current interface. Fig 4-4 Basic Configuration-Date &Time 4.1.3 DST Step1: Enter into MenuSetupBasicDST tab.
PAGE 26
DVR User Manual 4.2 Live Configuration Live configuration includes three submenus: live, main monitor and mask. 4.2.1 Live In this tab, user can setup camera name. Step1: Enter into MenuSetupLiveLive tab. Refer to Fig 4-6: Note: A soft keyboard will pop up by clicking the camera name. User can self-define the camera name. Step2: Checkmark the Show Name when you set your camera name. Click “Default” button to restore the default setting, click “OK” button to save the setting.
PAGE 27
DVR User Manual picture. Right click to exit. Click apply button to save the setting. Delete mask area: select a certain mask area and double click to delete that mask area. Then click apply button to save the setting.
PAGE 28
DVR User Manual 4.3 Record Configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.1 Enable Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 4-9: Parameter Record Audio Meaning To enable/disable recording for the channel To enable/disable audio recording for the channel Fig 4-9 Record Configuration-Enable Step2: Checkmark record and audio. Step3: Select All to setup the same settings for all channels. 4.3.
PAGE 29
DVR User Manual Note: If the rate value set is over high the maximum resources of the device, the value will be adjusted automatically. Parameter Rate Resolution Quality Encode Max bit stream Meaning Range from: 1-15(NTSC)/1-12(PAL) Support 1080P The higher the value is, the clearer the recorded image is. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Range from: 1536kbps~12288kbps Fig 4-10 Record Configuration-Record Bitrate 4.3.
PAGE 30
DVR User Manual 4.3.4 Stamp Stamp：This provides an option to enable or disable the Camera Name and the Time stamp on the video. You can also choose a position for the stamp on the screen. Step1: Enter into MenuSetupRecordStamp tab. Refer to Fig 4-12: Step2: Checkmark camera name and time stamp; click Setting button. User can use cursor to drag the camera name and time stamp at random positions. Refer to below Figures: Step3: Select “All” to setup all channels with the same parameters.
PAGE 31
DVR User Manual 4.3.6 Snap In this interface, user can set up resolution, quality, snap interval, snap number. 4.4 Schedule Configuration Schedule configuration includes three sub menus: schedule, motion and alarm. 4.4.1 Schedule This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a day. Every row denotes an hourly timeline for a day. Click the grid to do relevant setup. A highlighted area denotes selected timeline. Step1: Enter into MenuSetupSchedule tab.
PAGE 32
DVR User Manual 4.4.2 Motion This tab allows to setup schedule for motion based recording. Step1: Enter into MenuSetupScheduleMotion tab. Refer to Fig 4-15: Step2: The setup steps for schedule for motion based recording are similar to normal schedule setup. You can refer to 4.4.1 Schedule for details. Note: The default schedule of motion based recording is 24x7, that is, the color of schedule settings interface is dark blue. This enables motion based recording for 24x7.
PAGE 33
DVR User Manual 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. Operate the following steps to configure sensor alarm: Step1: Enter into MenuSetupAlarmSensorBasic tab. Refer to Fig 4-17: Step2: Enable channels by checking the checkboxes beside the desired channels. Step 3: Set the alarm type according to triggered alarm type. Two option: NO and NC. Step4: Click “Apply” button to save settings. Step5: Enter into Alarm Handling tab. Refer to Fig 4-18.
PAGE 34
DVR User Manual To alarm out: If selected, this would trigger the external relay output on detecting a sensor based alarm. Email: If you select this option, the DVR will send an email alert to the preconfigured email address in case of a sensor based alarm from the particular input. Snap: If selected, the system will snap images of the checked channels on an alarm and save them in the HDD automatically. Step 7: Enter into To Record tab. Select recoding channels. It would be recorded in case of an alarm.
PAGE 35
DVR User Manual Step3: The setup steps of motion trigger are similar to „Alarm Handling‟. You can refer to Chapter 4.5.1 Sensor Alarm Handling for more details. Step4: Click “Setting” button under the Area to display the following picture as shown in Fig 4-22: Step5: In the Area tab, you can drag slide bar to set the sensitivity value (1-8). The higher the value is the more sensitive it is to motion.
PAGE 36
DVR User Manual 4.5.3 Video Loss Step1: Enter into MenuSetupAlarmVideo Loss tab. Refer to Fig 4-24: Step2: The setup steps of video loss trigger are similar to alarm handling. You can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current interface. Fig 4-24 Video Loss 4.5.
PAGE 37
DVR User Manual normal schedule setup; you can refer to 4.4.1 Schedule for details. This step is very important for alarm out. Even if you have enabled alarm out in the motion based alarm or sensor based alarm, you will not see the result of alarm out if no schedule is added here. Buzzer It is an inbuilt alarm output device. To setup Buzzer: Step1: Enter into MenuSetupAlarm out Buzzer tab; Step2: Checkmark Buzzer and set buzzer alarm hold time. This would trigger the buzzer when the system is in alarm.
PAGE 38
DVR User Manual password. Once the setup is completed, your DVR will automatically dial up into your network. Step 4: No matter what kinds of way to connect internet, you should test the effectiveness of the network by clicking “Test” button after you setup the network. Step 5: If the network is well connected, please click “Apply” button to save settings. 4.6.2 Sub-stream Step 1: Enter into MenuSetupNetwork Sub-stream tab.
PAGE 39
DVR User Manual (SSL); user can setup mail servers (such as Gmail) as required. Send address/password: Sender‟s email address/password Receive address: Receiver‟s email address. Here user can add at least three mail addresses. Click TEST button to test the validity of the mailbox. Attaching image: After selecting it, the system will attach images when sending the emails. Fig 4-29 Network Configuration-Email 4.6.4 Server This function is mainly used for connecting ECMS.
PAGE 40
DVR User Manual as follows: Step 1: Select Other Settings tab. Enable DDNS server. Step2: Select DDNS server. Step 3: Input user name, password and host domain name registered in the DNS website (See the following example). Step 4: Click TEST to test the effectiveness of the relevant information. Step 5: Click “Apply” button to save the settings. Note: The domain name server that selected by user is a banding domain name of DVR.
PAGE 41
DVR User Manual Step 3: Click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed. Step 4: Create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account. After that, you shall provide your card number, card expiration and security code as well as billing address. Finally click “sign up for trial” button. Now, according to the domain name registration of “DDNS”，the domain name for DVR is “abc.dyndns.
PAGE 42
DVR User Manual DDNS server DDNS server User name Password Host domain Update interval Website provided by dynamic domain name supplier. The optional: www.meibu.com ， www.dyndns.com, www.no-ip.com and mintdns type. User name for log in the website of domain name supplier Password for log in the website of domain name supplier The domain name user registered at the supplier‟s website. The interval time of upgrading DVR IP address 4.
PAGE 43
DVR User Manual Step 5: Select Authority tab and then assign the operation rights for particular user. Refer to fig 4-34. Fig 4-34 Add User-Authority If you want to delete the user, please select the user you want to delete in the user list box and then click “Delete” button. If you want to modify the user, please select the user you want to modify in the user list box and then click “Setup” button to modify its general information and authority.
PAGE 44
DVR User Manual Fig 4-35 P.T.Z Configuration-Serial Port Definitions and descriptions of network stream: Parameter Meaning Address The address of the PTZ device Baud rate Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600. Protocol Communication protocol of the PTZ device. Range from: NULL, PELCOP, PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110, HY, N-control.
PAGE 45
DVR User Manual Fig 4-36 P.T.Z Configuration-Advanced Fig 4-37 Advanced-Preset Step 3: In the preset setting tab, while clicking Setting button, a dialog will pop-up as Fig 4-38:  User can control the dome by rotating up, down, left, right and adjust the rotating speed zoom, focus and iris of the dome;  Select the serial number of the preset point. Click enable the PTZ wiper and click button to button to enable the PTZ light.
PAGE 46
DVR User Manual  Click Add icon to set the speed and time of preset point; select a preset point and then click Delete icon to delete that preset point; click Modify icon to modify the setting of a preset point. User can click icons to adjust the position of preset point. Click Preview button to preview the cruise line; click OK button to save the setting; click Exit button to exit the current interface.  Select a preset point in the cruise line list box.
PAGE 47
DVR User Manual 4.9 Advanced Advanced configuration includes three submenus: Reset, Import/Export and Block/Allow list. 4.9.1 Reset This would reset the system to factory defaults and reboot the DVR. 4.9.2 Import/Export User can export the data files into mobile storage devices as backup and can also import specified data files from mobile storage device to DVR. 4.9.
PAGE 48
DVR User Manual 5 Search，Playback & Backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time Search Step1: Enter into MenuSearch Time search tab. Refer to Fig 5-1: Fig 5-1 Search Configuration-Time Search Step2: Select date and channels on the right hand side and press “Search” button. A date with highlighted borderline indicates presence of data.
PAGE 49
DVR User Manual Step4: Select the channel display mode and click button to play record. Use the playback toolbar to control the playback. Note: When the monitor resolution is set to VGA800*600, Part of the time search interface will be hidden. Click the “Expand to” button to expand the whole interface. Playback Buttons The method of record backup during a certain period in the playback interface: Select the start time by dragging the slider and click period. Next, click icon.
PAGE 50
DVR User Manual Fig 5-2 Search Configuration-Event Search Step 2: Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data. Step 3: Then checkmark Motion, Sensor or All accordingly. You can search for motion based recording and sensor based recording. Step 4: Press “Search” button to display the searched event information in the event list box. Step 5: Double click the event item to play the record. 5.
PAGE 51
DVR User Manual Fig 5-3 Search Configuration-File Management Lock: Select a file and click Lock button to lock this file. Once locked, the file cannot be deleted. Unlock: Select a locked file and click Lock button to unlock this file Delete: Select an unlocked file and click Delete button to delete this file. Step 4: Use “All” button to lock/unlock or delete all files in the file management column. Step 5: Double click an unlocked item to playback. 5.
PAGE 52
DVR User Manual refer to 4.5 Alarm Configuration for details. 5.5 Backup This unit supports backup by built-in SATA DVD Writer or USB flash drive. User also can make backup by IE browser via internet. Refer to 7.3.2 Remote backup. Step1: Enter into main menu  Backup interface.
PAGE 53
DVR User Manual 6 Manage DVR 6.1 Check System Information Check system information includes six submenus: system, event, log, network, online user and record information. 6.1.1 System Information In this tab, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event Information In this tab, you can search for events like motion, sensor and video loss. The utility provides an interface to have a date based and a channel based search.
PAGE 54
DVR User Manual 6.1.6 Record Information In this tab, a user can check resolution, ftp and record status including sensor based recording, motion based recording, manual recording or schedule recording. 6.2 Manual Alarm In this interface, user can trigger a manual alarm. 6.3 Disk Management 1. Format the disk Step1: Enter into disk management tab. Note: Please format the hard disk before recording.
PAGE 55
DVR User Manual Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the upgrade list box. Step 4: Select that software and then click upgrade button. It will upgrade automatically. Note: Please wait for a while when the system reboots. Never cut off power during upgrading. The original configuration will be reserved after upgrade. 6.5 Logoff Enter into Menu  Logoff tab. A log off dialogue box will popup. The device will log off by clicking “OK” button.
PAGE 56
DVR User Manual Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to input IP address, Subnet Mask, etc. If using DHCP, please enable DHCP in both the DVR and router. Step 2: Forward IP address and port number in Virtual Server setup of the router or virtual server (If the user has enabled the UPnP function in both the DVR and router, he can skip this step). Configure the firewall to allow accessing the DVR. Note: Port forwarding settings may be different in different routers and server.
PAGE 57
DVR User Manual 2. Connect the DVR to internet through PPPoE directly. Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to enable PPPoE and then input user name and password received from your ISP. Next, click „Apply‟. The DVR will connect to the server and would give a confirmation message. Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main menuInformationNetwork interface to check IP address).
PAGE 58
DVR User Manual Third: Select “open in 32- bit mode”. 6.7.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select “System Preferences””Internet &Wireless”click “Network” Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.
PAGE 59
DVR User Manual Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‟s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router. Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input http://192.168.1.100:81(here 192.168.1.
PAGE 60
DVR User Manual following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit” button to quit the browser. Then restart Safari browser. Input the IP address and http port to enter into the login interface of DVR. 6.7.2 On WAN There are also two ways for DVR to connect to Internet. 1.
PAGE 61
DVR User Manual 6.8 Remote Preview Fig 6-2 Remote Live Preview Symbol and function Definitions: Channel indicator ① Snapping picture ④ Talk ⑦ Master/sub stream status ⑩ Note: Click ② ⑤ ⑧ Screen display mode Start IE record Playback ③ ⑥ ⑨ Volume Start manual record PTZ control button to record manual and the record file will be saved in user’s PC.
PAGE 62
DVR User Manual Snap pictures The system will automatically capture pictures and save those pictures in the computer by clicking “Snap” the path for those picture in the ConfigurationLocal configuration. icon. User should set up PTZ control Please connect speed dome to the device via RS485 firstly. Make sure the protocol of the speed dome is supported by the device and is configured accordingly in the DVR.
PAGE 63
DVR User Manual Auto scan Wiper button Light button Click the right mouse on the live interface to display a pull-down menu as below Fig 6-3 Right Key Sub Menu Stream: This DVR supports master stream and sub stream. Master stream has higher frame rate, max 25fps(PAL)/30fps(NTSC)for every channel, but it needs higher network bandwidth; second stream has low frame rate, max 6fps(PAL)/7fps(NTSC)for every channel, but it requires low network bandwidth as compared to the master stream.
PAGE 64
DVR User Manual 6.9 Remote Playback & Backup 6.9.1 Remote Playback Click button to enter into record playback interface. Refer to Fig 6-4: Select the record date and channels and double-click the file name in the record file list box. Then user can play that file and preview the picture. Fig 6-4 Play Record File Interface This DVR supports remote time search, event search and file management.
PAGE 65
DVR User Manual Step1: Enter into SearchTime search. Refer to Fig 6-5: Fig 6-5 Time Search Interface Step 2: The highlight date in the area 2 indicates recorded data. Select the date in the area 2 and record channels in area3 Step 3: Click “Search” button.
PAGE 66
DVR User Manual Fig 6-6 Playback by Event Search By Event Search: Step1: Enter into SearchEvent Search.
PAGE 67
DVR User Manual Fig 6-7 Event Search Interface Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: motion and sensor. Step 4: The events will be display in the event list box by clicking Search button. Step 5: Double-click certain item to playback File Management Step 1: Enter into SearchFile management.
PAGE 68
DVR User Manual Step 2: Select highlighted date and channels. Step 3: Click “Search” button to search the recorded files.
PAGE 69
DVR User Manual 6.9.2 Remote Backup Click Backup button to enter into backup interface. Refer to Fig 6-9: Fig 6-9 Remote Backup Interface Step1: Select channels, set the start and end time and then click “search‟ button to display the file information in the file list box Step2: Select backup files and click “browse” button to set the path. Then click “backup” button to start backup. The backup files will be saved on user‟s PC. 6.
PAGE 70
DVR User Manual Fig 6-10 Remote System Configuration The sub menu list and the options in every menu are similar to that of the DVR. Please refer to Chapter 4 Main Menu Setup Guide for more details. 6.11 Tools Click on tool‟s tab to access the disk management tool. You can view the status of the HDD, change/view the read/write properties and can also format the HDD remotely. 6.
PAGE 71
DVR User Manual System, Event, Log, Network and Online users. The sub menu list and the options in every menu are similar to that of the DVR. Please refer to Chapter 6 System information for more details. Fig 6-11 Remote Information Search Note: There may be slight differences with respect to functions of remote surveillance between through IE and through Apple PC. Here we only take IE remote access for example.
PAGE 72
DVR User Manual 7 Mobile Surveillance This DVR supports mobile surveillance by phones with Windows mobile, symbian, android, Iphone and Blackberry OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. If you want to make mobile surveillance, please enable network service on the DVR first and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for five OS. 7.
PAGE 73
DVR User Manual the server. Refer to the below picture on the left: Step6：Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”. Refer to the below picture on the right: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 7.2 By Phones with Symbian OS Please use the smart phones with symbian version supported by this unit.
PAGE 74
DVR User Manual Step2：Input the DVR server‟s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer to the picture on the left: Step3：A welcome window will pop up and requires a package. Click the software name to download. Refer to the picture on the right: Step4：A security windows will pop up after downloading and ask if install the package. Click YES to install. Step5：A Scam shortcut icon appears on the system menu after finished. Step6：Run Scam program.
PAGE 75
DVR User Manual Step9：Enter Live View, it will connect the server and display pictures. Refer to the picture on the left: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. Step10：In Live View, users can snap pictures, change channels and control PTZ. Refer to the picture on the right: 7.3 By Phones with Iphone OS 1. Install through Iphone. Step 1: Open App Store function of Iphone. Step 2: Enable “search” function to search “Superlive”.
PAGE 76
DVR User Manual Step 3: Click Superlive-pro, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL” Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically.
PAGE 77
DVR User Manual Note: If it is the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply for one. 2. Install through PC.
PAGE 78
DVR User Manual Step 3: Enable “search” function to search “Superlive-Pro” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Checkmark “synchronously apply program” and “Superlive-pro”, and then click “Apply” button Operation Instruction for Superlive-Pro 1.
PAGE 79
DVR User Manual Enter server‟s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
PAGE 80
DVR User Manual Cruise 3. Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub To enter into the next interface To return to the previous interface Preset select the preset point Set the cruise line Speed Rotate speed of the PTZ Image View After the image is snapped, you can click icon to enter into the image view interface.
PAGE 81
DVR User Manual 4. Playback Click icon to enter into the playback interface. Then click „Search‟ button, select the time and channel to playback and click button. Now you can see the local file list. Select a file and click play button to playback. You can also copy or delete the file. Finally, click „Close‟ button to return to the previous interface. You can also search file to playback through time search, event search and remote file search. Please click the related button.
PAGE 82
DVR User Manual 5. Server list Click button to enter into server list interface. You can click icon to add a server list. After you add the list, you can click edit the server information and click icon to icon to delete this server information. 6. Configuration interface Click icon to enter into Settings interface. You can set many properties, such as local, basic, live, record, schedule, alarm, network, etc. Please see chapter four in respect of setting steps for more details.
PAGE 83
DVR User Manual 7. Information View Interface Click icon to enter into information view interface. You can check the information of system, network and online users. In the system interface, you can see the information of device name, device ID, hardware version, MCU version and so on. In the network interface, you can see the information of http port, server port, IP address, gateway, network status, etc. In the online users interface, you can see the information of the current online users. 7.
PAGE 84
DVR User Manual Step 2: Search “Supercam” Step 1: Run Google Market program Step 3: Press “Install” button Step 4: Click “OK” button Step 5: user can view the download and install process in notifications; once finishing downloading, the software will install automatically.
PAGE 85
DVR User Manual Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
PAGE 86
DVR User Manual Live view Stop playing Single channel display Screen mode Four channels display Snap PTZ Talk Record Live audio Hide Image view The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete 81
PAGE 87
DVR User Manual Record playback Play/Pause Stop Fast forward Slow play Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel. Second, select the record file and click it to playback. Finally, click „Return‟ button to return to the previous interface.
PAGE 88
DVR User Manual Config interface If Audio alarm is enabled, when Video Loss/Sensor/Motion happen，sound alarm will be triggered; If shake Alarm is Alarm setting Storage setting Display setting enabled, when Video Loss/Sensor/Motion happen，shake alarm will be triggered. User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. User can setup display order or display mode.
PAGE 89
DVR User Manual 7.5 By Phones with Blackberry OS 1. Open the browser of BlackBerry phone and enter sever address 2. Click “Supercam” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically. Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2.
PAGE 90
DVR User Manual (2) Enter into Menu->Option->Cache Operations, clear up browser cache. Refer to the below picture on the right: Note：When user used the Supercam software in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu->Advance options->Applications->Supercam and click “Disable Compatibility” button. This problem will be solved. Login Enter server‟s IP address (or domain name), user‟s ID and password.
PAGE 91
DVR User Manual Live view Note: User can click Return button on the Blackberry phone to return the previous interface.
PAGE 92
DVR User Manual Mark 1 Current viewing channel Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen Background Preset Mark 2 alarm Stop rotating the PTZ Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Select the preset point Group Server list Software configuration 87 Set the cruise line
PAGE 93
DVR User Manual Information view 88
PAGE 94
DVR User Manual Appendix A FAQ Q1. Why the DVR doesn’t turn on even after connecting to the power? a. The power adapter could have gone bad. Please change a new power adapter b. The power from the adapter may be not enough for operating the DVR. Please use the power adaptor supplied along with the DVR. c. It could be a hardware problem. Q2. There is no menu displayed and only has live image display. a. Check whether the monitor is connected to the main video out and not the spot out.
PAGE 95
DVR User Manual a. Make sure the HDD was formatted prior to use. b. Maybe the user hasn‟t enabled the record function or has done incorrect setup. Please refer to Chapter 5. c. Maybe HDD is full and thus the DVR is not able to record. Check HDD information from Disk management and if required, please enable the recycle function. d. Check the attributes of the HDD. It might be set to read only mode. e. The HDD could have gone bad. Please change another one. Q7. Mouse does not work. a.
PAGE 96
DVR User Manual b. Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings. Fig 8-1 Fig 8-2 Q9: DVR displays “please wait…”all the time a. HDD power cable and data cable may not be well connected. Please check the connections for HDD. b. It is also possible that the DVR was forced to stop because HDD has a bad sector and it may have caused the system to halt. Check with a good known HDD or try formatting the existing HDD.
PAGE 97
DVR User Manual Click the password or the input box a small keyboard will pop up. Please select characters to be input (the initial password is 123456), or you can use the digital keys on the front panel, or the digital keys on the remote controller. Q11: A hard disk is being identified as a new device however it was being used with another DVR of same model.
PAGE 98
DVR User Manual Fig 13-1 Fig 13-2 Q14. How to play the backup file? a. Insert your USB device where the backup files are saved in the USB port of PC. If your files are saved in NVR format, you must have already download the backup player box before doing backup. Then double click to open your USB disk to find your backup files and backup player. Double click b. icon to install backup player. After you install it, open this player and click “Open Path” button to open your backup file.
PAGE 99
DVR User Manual 94
PAGE 100
DVR User Manual Appendix B Calculate Recording Capacity Users can calculate the required size of hard disk according to the total recording duration and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings for CBR. Resolution 1080P Frame Rate Totally(FPS) Video Quality Bit Rate (kbps) Used Space(MB/h) 12(PAL)/ 15(NTSC) Highest Higher Medium Low Lower Lowest 12M 10M 8M 6M 2M 1.
PAGE 101
DVR User Manual Appendix C 1. Compatible Devices Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB 2.
PAGE 102
DVR User Manual 3. Compatible HDD list Brand Seagate Barracuda Seagate SV35.3 Seagate Pipeline HD.2 Maxtor Diamondmax HITACHI Deskstar WD WD1600JS Samsung HD161HJ Capacity 80G/160G/250G/320G /1.
PAGE 103
DVR User Manual Appendix D 8-CH Specifications Compression format Video output Video Input HDMI/VGA Resolution Record Resolution H.
PAGE 104
DVR User Manual Appendix E 16-CH Specifications Compression format Video output Video Input HDMI/VGA Resolution Record Resolution H.
PAGE 105
450011000370 A0